Description:1. Super bright, Low power consumption, long lasting.2. Stylish Bullet shape enhance the appearance of your custom bike. No glare is produced when working at night.3. The lights come with 3 wires which support running lights & turn signal lights.4. With netting which can protect the lens & LED bulbs well.4. Universal Fit For Most Motorcycles With 10 mm Mounting Bolt Thread. Specification: Product Name: Bullet Turn Light Voltage: 12 V Led Quantity: 15/pc Housing
Colour: Black / sliver Light
Colour: Amber Mounting Bolt Thread: 10mm Wire Connection: Black -- negative ; red -- turnning light ; yellow -- running light Quantity: 1 pair Fitment: Fit most of Custom application Chopper, Bobber, Cruiser, such as For Honda/ Suzuki/ Kawasaki/ Yamaha/ Harley Davidson/ Ducati/BMW/KTM etc. Minor drilling may be required for some models Package Included:1 X Pair Turn Signal Light

...

Feature:1. Flexible, crush resistant, non-toxicfragrance free (self-adhesive glue have some smell), creates a mold & mildew resistant vapor barrier.2. Reduces unwanted sound & most vibrations.3. Keeps your interior cooler in the summer & warmer in the winter.4. Can make the heat of the engine evenly distributed to avoid overheating the lid.5. Effectively blocks 97% of radiant heat transfer. Specification:
Material: Aluminum Foil+ Rubber Foam
Colour: Silver+ Black Recommended Install Temperature: -10C ~ +60 C Resistance Temperature Range: -40C ~ +149 C Waterproof Fire Resistant: Yes Thickness: Approx.10mm/0.25
Size: Approx.140X100cm /39.37X55.12 (LXW) Weight: About 800g (1cm=10mm=0.39inch) Application: Exterior bulkhead, firewall, hood, engine compartment, engine bays. Boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead. Also ideal for under floor applications as it has great load resistance properties. Installation:1. Clean the dust & oil which cover the place you want to.2. Trim engine cover size well before the coherence.3. Remove the isolation paper & stick the heatinsulationpad in theengine covers.4. Finally press it evenly, especially pay attention to nearby theconcave-convex position. Installation Notice:1. Please clean the surface you want to paste.2. Make insulation materials & sheet metal firm fit, & play best adhesive, damping performance 3. Do not cover the chassis wiring or air holes when you installation 4. Appropriate use of adhesive tape will strengthe


...

Feature: Flexible, crush resistant, non-toxicfragrance free (self-adhesive glue have some smell), creates a mold & mildew resistant vapor barrier. Reduces unwanted sound & most vibrations. Keeps your interior cooler in the summer & warmer in the winter. Can make the heat of the engine evenly distributed to avoid overheating the lid. Effectively blocks 97% of radiant heat transfer. Specification:
Material: Fiberglass+ Rubber Foam
Colour: Silver+ Black Recommended Install Temperature: -10C ~ +60 C Resistance Temperature Range: -40C ~ +149 C Waterproof Fire Resistant: Yes Thickness: Approx.10mm/0.25
Size: Approx.100X55cm /39.37X21.65 (LXW) Installation:1. Clean the dust & oil which cover the place you want to.2. Trim engine cover size well before the coherence.3. Remove the isolation paper & stick the heatinsulationpad in theengine covers.4. Finally press it evenly, especially pay attention to nearby the concave-convex position. Applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. Boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead. Also ideal for under floor applications as it has great load resistance properties. Package Included:1 X Sound Heat Deadener


...

Description:1. Chain roller pulley slider complete with heavy duty bearings ready to use.2. This chain pulley roller slider is an necessity for wheel guide, which helps the driving system to function well.3. It is made from premium materials for strong strength & long durability.4. Comes with several colors for choices. It will match your vehicle chain perfectly. Specification: Product Name: Chain Pulley Roller Slider
Material: Plastic, Metal
Colour: Red, Yellow, Orange, Blue, Green, Black Inner Diameter: 10mm
Size: 28mm x 32mm / 1.1 x 1.26 Fitment: Suitable for most of dirt pit bikes, street bikes, motorcycles, ATV, off road vehicles, etc. Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. All

Dimensions are measured by h&, Please allow 0.5-1 inch differencedue to manual measurement. (1inch=2.54cm).3. The color of the actual items may slightly different from the listing imagesdue to different computer screen, thanks for your understanding.4. Instruction is not included, professional installation is highly recommended. Package Included:1 XChain Pulley Roller Slider




...

Description:1. Brand new chain roller.2. Dirtbike nylon chain roller wheel complete with heavy duty bearings ready to use.3. This part attached the swing arm; the chain then runs over it to keep it aligned.4. Can also be used on gas petrol motorized bicycle conversions kits. Specification:
Colour: Black/red/white
Material: Plastic Quantity: A Piece Length: 34mm
Width: 435mm Inner Diameter: Approx. 10mm Model Name: Drive chain roller Package Weight: Approx. 60g Item Type: Drive belts Fitment:10mm chain roller pulley tensioner for Chinese Pit Dirt CRF50 XR50 Note:1. Please check the size if it matches your models before you purchase 2. Pls allow 0.5-1 inch difference due to manual measurement. (1 inch=2.54cm)3. No Instructions Included. Professional Installation Is Highly Recommended!!! Package Included:1 X Chain Roller


...

Specification: Product Name: Motorcycle Shock Absorber Eye Adapter
Material: Aluminium Alloy
Colour: Black /

...

Description: Condition: 100% Brand New
Material:alloy steel, surface zinc plating Ball: Heat Treated Precision Ground
...

Description :10mm General Caliber Lawn Mower Head Trimmer Head Grass Cutter Replacement- Easy install, convenienct to use.- Economic benefits, high cost comparison, durable.- It is suitable for making a low grass, so that the grass grows more neatly.- Fits most brush cutters
- including MTM, Bauholtz, BBT, Dynamic Power Baumr-AG & more. Specification: Material Hardened Plastic Color Black Weight 216g Caliber 10mm Diameter 105mm Package

Includes:: :1 x Trimmer Head


...

Description: Simple on/off tap for Pepboys Wen Power Pro. Good quality, good operation. It is very durable & convenient. Specification: Name: Fuel Valve Tap Model: 813516
Material: ABS plastic+ Steel
Colour: Silve white Length: 102mm Fitment: For Pepboys Wen Power Pro. Note:1. Please check the size measurement chart carefully before making payment.2. Please allow 1-5mm error due to manual measurement.please make sure you do not mind before you bid.3. The colors may have different as the difference display, please underst&. Package Included:1 X Fuel Valve Tap

...

Description: Pair of high quality alloy wheel spacers & bolts kit. Spacers are precision fit & ensure a perfect fitment with both your alloy wheel & vehicle hub. Perfect for improving the look of your vehicle & adjusting wheel offset. Specification: Product name: hub wheel spacers Material: Forged Billet 6061 T6 Aluminum Color: chrome VEHICLE BOLT PATTERN: 5x 120 MMWHEEL BOLT PATTERN: 5x 120 MMPCD: 5x 120THICKNESS: 10 MM THICK (Per Spacer)INNER DIAMETER: 72.56MMLug Bolt Specifications Lug bolt length: 67.8mm/2.67in Lug bolt thread length: 40mm/1.57in Lug bolt seat angle: 60 degrees Lug bolt thread pitch: 12x 1.5mm Lug bolt seat type: cone seat Placement on vehicle: left, right, front, rear
Features:1. These are precision fit 10mm Hubcentric wheel spacers, In this kit you get 2 spacers & 10 extended wheel bolts. These are easy to fit, simply remove your wheel fit the spacers onto the hub (make sure nothing is fowling it onto the hub) & refit the wheel with the longer bolts.2. The spacers are a nice one piece billet aluminum with a 5x 120 PCD with a centre bore of 72.56mm & the bolts have a thread length of 40mm with a 60d tapered seat. Fitment: For BMW 1 SERIES (E82, E88)
- 128i, 135i, M1, 1 M For BMW 3 SERIES (E30)
- M3 For BMW 3 SERIES (E36)
- 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3 For BMW 3 SERIES (E46) 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330i, 330xi, M3 For BMW 3 SERIES (E90, E91, E92, E93)
- 325i, 325xi, 328i, 328x I, 330i, 330x I, 335d, 335i, 335ix, 335xi, M




...