United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
12V 775 Double-Motor 400m 2.4G Differential Turn Transmitter Fishing
RC Boat Parts
Description:Large horsepower net set with double 775 motor 480A water-cooled ESC 50mm four-bladed propeller400 m 2.4G differential remote control. Aluminum alloy decoupling device. 385 water pump.This set uses a 2S -3S lithium battery 7.4V -11.1V and a 12v battery 12v 18650 lithium battery pack. (Battery needs 20A discharge current or more)Suitable for installation of 70-120 cm hull.Can do pull net boat to fight the nest boat, leisure and entertainment boat. School boat model competition ship.The 2.4G remote control handle has a built-in lithium battery. Use the Android cable to charge, a phone charger or a computer. The steering angle can be adjusted. A total of 2 motors and 4 servos can be controlled. It is necessary to remotely control the decoupling device and remotely control the
bait bin of the ship. The remote control is 400 meters.Receiver 1 and 2 channel connection ESC control dual motor Forward Back Left turn Right turn.Connect the 3 and 4 channels to the dispenser. Press the button servo to rotate 45 degrees and release the automatic return.5 and 6 channels are connected to the steering gear, and the button servo is rotated 90 degrees to position. Press the servo again to return.Remote control code: (or restore factory settings)For the code process: first, after the receiver is plugged in, the receiver starts to flash, then press the code switch on the back of the handle, and press and hold. Turn on the power switch of the remote control handle. Hold for 3 seconds.
bait bin of the ship. The remote control is 400 meters.Receiver 1 and 2 channel connection ESC control dual motor Forward Back Left turn Right turn.Connect the 3 and 4 channels to the dispenser. Press the button servo to rotate 45 degrees and release the automatic return.5 and 6 channels are connected to the steering gear, and the button servo is rotated 90 degrees to position. Press the servo again to return.Remote control code: (or restore factory settings)For the code process: first, after the receiver is plugged in, the receiver starts to flash, then press the code switch on the back of the handle, and press and hold. Turn on the power switch of the remote control handle. Hold for 3 seconds.
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark