Specification:
Colour: Black Shell+ Clear Lens
Material: Plastic Shell+PC Lens Voltage: 12VLED Number: 5 LEDs

...

Description:- 1 pieces amber forks strip lights.- Powered by high power amber 3014-SMD LED chips.- Waterproof design & comes with self-adhesive tape & cable tie for easy installation.- High power amber color lighting output as turn signal lights.- Work for most Motorcycles such as For Honda For Kawasaki For KTMFor Suzuki For Yamaha & many other brands as well. Specification:LED Shell
Colour: Black LED
Colour: Amber Placement on Vehicle: Front Material (LED Strip ): PVCPackage Included:1 X Amber Forks Strip Lights

...

Only US$13.67, buy best 12v motorcycle grill bullet led turn signal lights red indicator lamps sale online store at wholesale price. ...

Description:1. Flexible & adhesive, the pads fit under your grips without causing any loss of control.2. Quick warm up time.3. Adopt 3 position switch, the temperature can be adjusted according to dem&.4. Keep your hands warm in cold weather.5. Work with all Motorcycle, Electromobile, Hand Trailer etc. Specification: Heated grip pads
Colour: Black Quantity: 2 pcs heated grip pads, connection wires, 3 position switch, heat resistant tape, 2 pcs heat resistant covers. Voltage: 12 V Power: 20W x 2 Installation: Wiring type Temperature: 45 ℃ -65 ℃3 Position Switch: 45 ℃ / OFF / 65 ℃ Heated grip pad

Size: 92 x 84 mm / 36.22 x 33.07 (Lx W) Installation: Firstly, clean up the bar, electric heating is put on the back of the double-sided adhesive, stick to the handlebars, black condom is heat shrinkable tube, set on the electric put, with blower let it shrinks, it will be more strong. Note: Please note that wiring instructions arent included but you can find tutorials on the weband it should only take you 10 to 15 minutes to wire in. Package Included:2 X Heated Grip Pads (With Connection Wires)1 X 3 Position Switch 1 X Heat Resistant Tape 2 X Heat Resistant Covers


...

Description: Waterproof, sealed, IPX6, weather resistant Flowing water lamp & flash light modes General LED lamp for motorcycle & scooter.LED light-emitting diode, low power consumption, high brightness, strong earthquake resistance, good heat dissipation & low temperature.A variety of colors can be selected. Specification:
Material: Aluminum Voltage: 12 V Light Source Power: 9 WLight
Colour: Blue, Green, White
Size: About 2cm x 1.9cm (0.78 x 0.74) Cable Length: About 38cm (14.82) Application: Motorcycles Handlebar Lumen: 150lm Ingress Protection: IPX6 Wiring Guide: Red one is positive Black one is negative Fitment: Universal fit for electric scooters, motorcycles or bicycles & other vehicles Package Included:1 X Motorcycle Light


...

Only US$35.99, buy best 12v motorcycle led backlight odometer & tachometer speedometer dual gauge black universal sale online store at wholesale price. ...

Specification: Product Name: Odometer
Material: Iron Voltage: DC 12VLED
Colour: Yellow / green / red / blue

...

Description: This listing features 1 Pcs Integrated Taillight consisting of License Plate, Running, Brake & Turn Signal Light. Specification: Product Name: Motorcycle Brake Tail Light Voltage: DC 12 V Size (approx.): Length: 135mmx 54mmx 56.5mm (LXWXH) Mounting Screw Diameter: 70mm LED Number:6 LED/ Per Light Cable Length: 52cm
Material: High Quality Metal Housing + PC lens Lens
Colour: Smoke/ White/ Red Light Type: LEDLED
Colour: Red + Amber Placement on Vehicle: Rear Qty: 1pc Installation:5 wires connection: Black for Negative Red for Brake Light Green for Running light Yellow for Right Turn Signal Light Pink for Left Turn Signal Light
Features: Integrated Taillight Consists of License Plate, Running, Brake & Turn Signal Light Upgrade your Motorcycle a Unique Style Appearance Direct Replacement. Easy Installation. Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm)3. There are no instructions included in this kit. Professional Installation Is Highly Recommended Package Included:1X Integrated Tail Light



...

Description: Surface made from polypropylene. Three fixing points with central hole for easy cleaning. Very low energy consumption so that the engine power is not reduced. Waterproof electronic board fitted with a stabilized circuit & designed to dampen sudden voltage jumps. The LED Rear-Fender Brake Tail Light is universal & amazing for off road motorcycles. Operating range from 12 to 15 Volts, it is low energy consumption so the engine power is not reduced. This lightweight, universal LED tail Turn signal light is mounted under the rear-fender of virtuallyevery off-road motorcycle. The installation is easy, you can finish it in a few minute. No hardware or instruction. The turn signal lights, amber color light. The tail & the turn signal lights are matching very well, they will make your bike look pretty cool & amazing. Specification:LED Rear-Fender Tail Light: Power: 12-15V
Colour: Black Housing + Red Light Len
Colour: Red LED Quantity: 12 Position: Rear
Material: ABS Plastic
Size: 32.5x 10x 4cm Cable Length: 30cm Connection: 3 Wires (Green Line: Brake Light, Red Line: Tail Light, Black Line: Ground Line)LED Turn Signal Lights: Power: DC 12V
Colour: Red Housing + Amber Light Lens
Colour: Clear LED Quantity: 30 Position: Rear
Material: ABS Plastic
Size: 11x 2x 1.2cm Cable Length: 28cm Connection: 2 Wires (Black Line: Ground, Red Line: Turn Signal Lights) Fitment: Universal fits for Most of motorcycle models, Dirt Bike, or any Custom Bikes. It is not specific designed for any bike. Some minor modifications may







...

Description: Can be used for other products to measure voltage Mini size & easy to install, great for checking voltage Used to monitor the battery voltage, grasp the battery voltage status DC voltage measurement, with the functions of anti-reverse, short circuit protection Universal for motorbike car / boat / ATV / UTV / camper / caravans / travel trailer etc Specification:
Material: Plastic Display: Green, Red, White, Blue Operating Voltage: 12-24 V Measure Voltage: 6-30 V Display: 3-bits
Size: 36.7 X 28.8 X 26.39mm/1.44" X 1.13" X 1.03" Interface Type: Anode & Cathode Fitment: Universal fit for all cars, motorcycles & other universal models Package Included:1 X LED Digital Display Voltmeter Meter (With 60cm line + 2 terminal + 1 bezel)

...