null

Features:-The Jazz Drum Set targets for children aged 3 & over before the transition to a full size drum

...

16x 16mm Flywoo Goku F411 Micro Stack F4 Flight Controller BS13A BL_S 2-4S 4in 1 ESCSpecification: Brand Name: Flywoo Model: GOKU F411 Micro Stack Item Name: F4 Flight Controller 13A BL_S 2-4S 4in 1 ESC Stack F411 Flight Controller MCU: STM32F411CEU6 Gyroscope: MPU6000 Barometer: NOFlash: 8MBEC: 5V 2 A Input Voltage: 2-4 S Firmware: FLYWOOF411
Size: 22x 23mm Mounting Hole: 16x 16 (M3) Weight: 2.3g GOKU BS13A BLheli_S 4 In 1 ESCCon. Current: 13 A Burst Current: 15 A Input Voltage: 2-4 S Firmware: BLheli_SBEC: NOWeight: 2.5g Mounting Hole: 16x 16mm (M3)- Support Oneshot, Multishot, DShot 150/300/600 Pacakge Included:1x F4 Flight Controller Board 1x BS13A 4in 1 ESC1x bag of Screws 1x Capacitor 1x Cable
...

16x 16mm Full Speed Teeny F4 F4 MPU6000 1-2S Flight Controller Integrated with OSD for RC Drone Specification: Brand Name: Full Speed Model: Teeny F4 Item Name:F4 1-2S Flight Controller Integrated with OSDProcessor: STM32F411 Sensor: MPU-6000 (connected by SPI) Input Voltage: 1-2S Lipo or 1- 2S HV Lipo
Size: 20*20mm Mounting Hole: 16*16mm Mount Hole Diameter: 2mm Weight: 1.9g

Features:-Support programmable LED Strip (turn off transponder before using)-Support BLheli/BLHELI_S suite Pass-through ready-Support PPM, Oneshot 125, Oneshot 42, Multishot, Dshot 150, Dshot 300, Dshot 600-Built-in voltage detection, alarm-Built-in Betaflight-OSD, Configure by Betaflight GUI-Buzzer Ready (Solder pin)-LED_STRIP Ready (Solder pin) Package Included:1x Teeny F4 flight controller board 1x 6 Pin Cable 4x M2*5+5 Nylon column 4x M2 Nuts


...

16x 16mm Geprc Stable F411 Stack Part 12A BL_S 2-4S 4in 1 ESC for RC Drone FPV Racing Click here to buy complete Stable F411 3-Layer Stack Specification: Brand Name: Geprc Model: Stable F411 Item Name:12A BLheli_S 2-4S 4in 1 Brushless ESCMCU: BB21F16 G Continuous current: 12 A Input voltage: 2-4S LIPOESC protocol: pwm, oneshot 125, multishot, dshot 150, 300, 600, etc.
Size: 23mm*21mm Mounting hole: 16*16mm Firmware target: Blheli_S G_H_30 Current meter: 210 Weight: 2.7g Applciaiton: Original ESC Part for Geprc Stable F411 Stack Package Included:1x Geprc 12A 4in 1 ESC
...

16x 16mm Geprc Stable F411 Stack Part 5.8G 48CH 25/100/200m W Switchable FPV Transmitter Click here to buy complete Stack. Specification: Brand Name: Geprc Model: Stable F411 Item Name:5.8G 48CH 25/100/200m W Switchable FPV Transmitter Power: PIT/25/100/200m W Antenna interface: IPEX (UFL) Telemetry: IRC Tramp
Size: 17mm*27mm Mounting holes: 16*16mm Integrated LC Filter Weight: 1.6g Package Included:1x 5.8G 48CH 25/100/200m W Switchable FPV Transmitter
...

HAKRC 16x 16mm F4 2S Flight Controller AIO OSD BEC for RC Drone FPV Racing Specification: Brand Name: HAKRCItem Name:F4 Flight Controller AIO OSD BECCPU: STM32F411 C Gyro: MPU6000 Input Voltage: 2S Lipo Integrated with LED_ Strip, OSDBEC: 5V @ 0.5 A Built-in LC Filter Support BF firmware (HAKRC F411 firmware) Dimension:20x 20mm Mounting Hole: 16x 16mm, M2 Weight: 3g Application: for frame kit less than 70mm. Receiver Setting:DSM2/DSMX, SBUS, IBUS Receiver, Set RX1 PPM Receiver, dont need choose UART Port. Package Included:1x F4 Flight Controller 1x bag of Screws ...

16x 16mm HAKRC LEDF4 F4 Flight Controller Integrated with OSDRGB LED 1S for RC Drone Specification: Brand Name: HAKRCModel: LEDF4 Item Name: F4 Flight Controller Integrated with OSDRGB LEDCPU: STM32F411 C Gyro: MPU6000 Input Voltage: 1S Lipo Integrated with LED_ Strip, OSDBuilt-in LC Filter Support BF firmware (HAKRC F411 firmware) Application: for frame kit less than 70mm. Receiver Setting:DSM2/DSMX, SBUS, IBUS Receiver, Set RX1 PPM Receiver, dont need choose UART Port. Package Included:1x LEDF4 Flight Controller 1x Cable 1x bag of Screws ...

16x 16mm SPC Maker Mini F3 1S Flight Controller 5V BEC Built-in 4A 4in 1 ESC for RC FPV Racing Drone Specification (user manual): Brand name: SPC Maker Item name: mini F3 flight controller built-in 4A 4in 1 ESCInput: 1 Cell Li Po BEC: 5.1V@1.5 A Firmware: OMNIBUS F3
Size: 30x 25.5mm Mount holes: 16x 16 mm Weight: 9g

Features:-F3 Flight Controller integrated with 4A 4in 1 ESC-MPU6000 6 axis SPI Gyro Accelerometer-Drag & Drop OSD configured via Betaflight Configurator-SBUS/PPM & Spketrum dsm-x Ports Package included:1xmini F3 flight controller built-in 4A 4in 1 ESC4x M2*8 nylon column 4x M2 screw nut


...

16x 16mm Teeny F4 Pro 1-2S Flytower F4 OSD FC w/ Buck-Boost Converter 5A BL_S DShot 600 4 In 1 ESCSpecification: Flight Controller: (Top) Item name: Teeny F4 Pro flight controller board Model: Teeny F4 Pro Processor: STM32F405RGT6 Sensor: MPU-6000 (connected by SPI) Firmware Version: betaflight_3.2.0_OMNIBUSF4SD- Built-in betaflgiht OSD- Built-in Buck-Boost Converter Input Voltage: 1-2S Lipo Receiver: PPM, IBUS, SBUS, DSM2, DSMX etc.
Size: 20*20mm Mounting hole: 16*16mm Mount Hole Diameter: 2mm (M2 ) Weight: 2.2g Application: for Micro FPV brushless drone 5A 4 in 1 ESC: (Bottom ) Item Name: Teenypro 4 In 1 5A BLHeli_S ESCMode: Teenypro Input Voltage: 1-2S Lipo Con. Current: 5 A Peak Current: 7A (5S) Firmware: BLHELI_SProcessor: SILABS EFM8BB21F16GBEC: NO
Size: 23x 27mm (
Includes:solderpad) Mounting Holes: 16x 16mm (M2) Weight: 2.1g Firmware Target: BLHeli_S S_H_50_REV16_7- Support Dshot 150 Dshot 300 Dshot 600 Oneshot 125 Multishot PWM

Features:- Support programmable LED_strip- Support BLheli/BLHELI_S suite Pass-through ready- Support PPM, Oneshot 125, Oneshot 42, Multishot, Dshot 150, Dshot 300, Dshot 600- Default Dshot 600- Built-in voltage detection, alarm- Built-in Betaflight-OSD- Buzzer solder pin- LED_STRIP connector Setting Notice:- SBUS/IBUS/DSMX receiver please configure RX1 (UART1) as input, & enable Serial_RX- PPM receiver dont need to enable Serial_RX- DSM/DSM2/DSMX receiver power from 3.3V- SBUS & PPM receiver power from 5 V Package Included:1x F4 Flight Controller Board 1x 5A 4 In 1 ESC1x 6P Cable 8x M2*5




...

16x 16mm Teeny F4 Pro F4 Flight Controller w/ Betalflight OSDBuck-Boost Converter for Micro FPV Racing Drone Specification: Item Name: Omnibus F4 FC Integrated with Betaflight OSDModel: Teeny F4 Pro Processor: STM32F405RGT6 Sensor: MPU-6000 (connected by SPI) Firmware version: betaflight_3.2.0_OMNIBUSF4SDInput Voltage: 1-2S Lipo
Size: 20*20mm Mounting Hole: 16*16mm Mount Hole Diameter: 2mm Weight: 2.2g-Built-in Buck-Boost Converter- Receiver: PPM, IBUS, SBUS, DSM2, DSMX etc.- Suitable for Micro FPV brushless frame

Features:-Supportprogrammable LEDStrip (turnofftransponderbeforeusing)-Support B Lheli/BLHELI_ Ssuite Pass-throughready-Support PPM, Oneshot 125, Oneshot 42, Multishot, Dshot 150, Dshot 300, Dshot 600-Supportthenewest DSHOTESC-Built-involtagedetection, alarm-Built-in Betaflight-OSD, Configureby Betaflight GUI-Buzzer Ready (Solderpin)-LED_STRIPReady (Solderpin) Setting Notice:- SBUS/IBUS/DSMX receiver please configure RX1 (UART1) as input, & enable Serial_RX- PPM receiver dont need to enable Serial_RX- DSM/DSM2/DSMX receiver power from 3.3V- SBUS & PPM receiver power from 5 V Package Included:1x Teeny F4 Pro flight controller board 4x M2*5+5 Nylon column 4x M2 Nuts 4x M2 Screw


...