United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
2.4inch 60mm LED Turbo Boost Vacuum Press Pressure Gauge Meter 35
Light Colors
Specifications:Color: BlackMaterial: Plastic cover + aluminum + IronPressure: 300KPaDiameter: 60mmPower-supply voltage: 10V to 16V DC (12V vehicles only )Current consumption: the maximum value obtained when connecting one gauge+B wire: 200mA (IGN ON )ILM wire: 0.5mATemperature range: Temperature range for storage Temperature range for operationGaugeBoost sensorPressure sensorTemperature sensorExhaust temperature sensor-30(-22) ~+ 80(176)-30(-22) ~+100(212)-30(-22) ~+140(284)-30(-22) ~+150(302)-30(-22) ~+130(266)-30(-22) ~+60(140)-30(-22) ~+ 80(176)-30(-22) ~+120(248)unit C (F)-30(-22) ~+150(302)-30(-22) ~+130(266)※The sensing part of exhaust temp. sensor is not included in the temperature range above. How to attach Mounting bracket set1) Open the package and take out the double-sided
tape as Figure 2 to attach the bottom ofthe bracket(as Figure 1).2) Insert the protruding part of the bracket into the meter cup, using the bolts, nuts and washersto fix the bracket(as Figure 3)3. Attach 1~2 pieces of double-sided tape to the aluminum caseas buffer (as Figure 4).4) Pass the meter wires through the hole of the meter cup and connect them to the gauge.5) Place the gauge in the meter cup making sure that wires are not sandwiched. 6) Attach double sided tape on the back of the mounting bracket as shown in figure 5. Bend themounting bracket to conform to the structure of the location where you intend to attach it.Note:1. Please allow 1-3mm error due to manual measurement.Pls mak
tape as Figure 2 to attach the bottom ofthe bracket(as Figure 1).2) Insert the protruding part of the bracket into the meter cup, using the bolts, nuts and washersto fix the bracket(as Figure 3)3. Attach 1~2 pieces of double-sided tape to the aluminum caseas buffer (as Figure 4).4) Pass the meter wires through the hole of the meter cup and connect them to the gauge.5) Place the gauge in the meter cup making sure that wires are not sandwiched. 6) Attach double sided tape on the back of the mounting bracket as shown in figure 5. Bend themounting bracket to conform to the structure of the location where you intend to attach it.Note:1. Please allow 1-3mm error due to manual measurement.Pls mak
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark