United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
4 Stroke 4HP Outboard Boat Engine Boat Motor Air Cooling System
ï» Specification:Displacement55CCTransmission ratio2.08 (27:13)Number of cylinders1ShiftclutchFull throttle perating range4500-5500r/minMaximum output2.9kwType2-strokeIgnition systemCDI systemStarting systemManual startStaring carburetion systemChoke startContorl SystemTiller controlThe engine and the propeller ratio2:1Recommended fuelRegular 92 unleaded gasolineTilt tilt systemmanual tiltStandard mailboxbuilt-in 1.4LAdapted stern plate height440 mmShort shaft40cmOverall length85.5CMOverall widteh36.5cmOverall height22cmTransomplate height42cmBore x stoke44mm*33mmAnnouncements:After in the sea water or turbid water cruising1.Use the fresh water cleaning the outboard motor2.With the moderate SPREED circulating the engine, cool off the water down with fresh water.3.Before completely running
out cooling water, don't put the outboard motor outside.Otherwise the water cam pass the exhaust port to enter theair cylinder, from that will cause the engine breakdown.4.The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.5.Before the long term storing, you should run out of the gasoline in the fuel tank.Note:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10hours).(if you do not know how to handle this, please contact with us )Warning:Cylinder Scoring is a serious damage, which caused by improper use and will cost you a lot of money to repair the motor.Don't do the following will avoid cy
out cooling water, don't put the outboard motor outside.Otherwise the water cam pass the exhaust port to enter theair cylinder, from that will cause the engine breakdown.4.The engine should deposit in the aridity and ventilated well place, avoid exposing directly in the sunshine.5.Before the long term storing, you should run out of the gasoline in the fuel tank.Note:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period (10hours).(if you do not know how to handle this, please contact with us )Warning:Cylinder Scoring is a serious damage, which caused by improper use and will cost you a lot of money to repair the motor.Don't do the following will avoid cy
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark