APM Pixhawk XL-Max Sonar EZ4 Ultrasonic Range Finder MB1240 The XL‑ Max Sonar‑EZ4 has the highest noise tolerance & narrowest beam of any of our indoor sensors. The sensor is designed & calibrated to provide reliable range information to large targets even in environments with strong acoustic or electrical noise sources. The sensor is small in size, yet the high output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, & real-time noise rejection algorithms results in virtually noise free distance readings for most users. This holds true even in the presence of many of the various acoustic or electrical noise sources. The XL‑ Max Sonar‑EZ sensor line is factory calibrated to match the sensor beam patterns & provides a long range detection zone. The XL-Max Sonar-EZ4 performance to large targets is only beaten by the MB7052. Description:- Dimension: 22*20*25mm- Weight: 6.1g- Distance range: 0-7.65m- 0-20cm output is 20cm- Resolution: 1cm- Power consumption: 3.4m A@5V, 2.1m A@3.3V- Work voltage: 3.3-5V- 42 K Hz- 10hz read speed ratio- Inner/external trigger- Support three interface: TTL, Vcc, PWM output Product Specifications Resolution of 1 cm 10 Hz reading rate 42k Hz Ultrasonic sensor measures distance to objects Ro HS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no dead zone, objects closer than 20 cm range as 20 cm Operates from 3.3-5.5 V Low 3.4m A average ...

Only US$9.99, buy best apm power module 25v 90a with 5.3v 3a dc bec for apm/pixhawkapm 2.6 2.8 multirotor flightcontral sale online store at wholesale price. ...

APM Power Module V1.0 Vision 30V/90A with BEC for RC Model It is not include the plug & soldering. Description:
Material:
...

APM Power Module with 5.3V DC BEC Available with T or XT60 Description: Input voltage: 6~30V (2~8S) Output voltage: 5.3V0.1 V Maximum output current: 3 A Maximum current: 90 A Maximum voltage: 30V6P cable can be directly connected to APM/ Pixhawk flight control Additional 4P rows of pin-free to wire/PIN to connect to another flight control Dimensions: 25mm x 21mm x 9mm Weight: 17g (containing all the wire/plug is not included) Package included 1 x Power Module ...

APM/ Pixhawk 180A Hall Sensor Inductive Galvanometer UBEC 12S Power Monitor Module Ammeter Current Meter Molex /JST-GH 1.25mm for RC Drone FPV Aircraft Airplane Product Specification Model: (optional) Hall Sensor / Galvanometer + JST-GH Wire / Galvanometer + Molex 1.25mm Wire / Galvanometer + Hall Sensor + JST-GH Wire / Galvanometer + Hall Sensor + Molex 1.25mm Wire
Size: 50*25*10mm Weight: Main module 16g, Hall sensor 6.5g Input Voltage: 2-12S LIPO Maximum 60 V Output voltage: 5V/3 A Voltage detection ratio: 15.7 (3.3V system can reach 15.7*3.3=51V=12S LIPO) Current detection output ratio: 54.64A/V (3.3 system detects 54.64*3.3=180A) How to Calibrate on PIX Flight Control (refer to the last 3 pictures on page.)1. Select 434, that is, the sensor module chooses the preset Attopilot 180A module, the system will load the voltage divider value is 15.7, the current ratio is 54.64. After selection, in some cases, it will not take effect immediately. It is necessary to restart the flight control, so after selection 434, please restart the flight control & reconnect the ground station.2. After reconnecting to the ground station, reopen the battery monitoring settings page to ensure that the sensor module is switched to other when it has been displayed as 434 successfully saved. At this time, the voltage divider & ampere per volt columns turn gray to white.3. The system automatically divides the input voltage by the voltage detected by its ADC to get a new voltage divider. The calibration is c
...

Glass Fiber Shock Absorber Anti-vibration Set for APM2.5 2.6 KK MWC Description: Item Name: Shock Absorber Material: Glass fiber

...

APM2.5/2.6/2.8 MWC Flight Controller Light Buzzer Indicator V1.0 Description: Suit for APM2.5/2.6 & Multiwii flight controller With Red/ Blue LED & buzzer Red LED for ARM indicator Blue LED for GPS status indicator Buzzer for alarm APM Status Indication Red LEDARMsolid DISARMflash Blue LEDGPSFIXsolid GPSUN-FIXflash Buzzer ARM2 Beep DISARM1 Beep Low battery Continue Beep.. Beep.. Crash Fast continue Beep. Beep. Installation pictures:LED Renderings: Wiring Diagram: In order to ensure the indicator is working properly, you need to set the following: Package
Includes::1 x LEDBuzzer Indicator
...

APMT1604 DP5320 milling insert Indexable tool c arbide inserts turning tool CNC high quality Cutting tool APMT 1604 For BAP400 ...

Features:- Remote arm/disarm- Remote look- Remote 2-stage unlock- Silent mode activate/deactivate- Override

...

Specification:1. Brand: IMEGO2. Model: W303. Item: Smart IR Control 4.

Material: ABS + Metal 5. Connection:

...