United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
CM921S 2.4G Satellite Receiver For CM921 Compatible DSM2 DSMX Spektrum
JR Transmitter
Redcon CM921S 2.4G Satellite Receiver For CM921 CompatibleDSM2 DSMXSpektrum JRDescription:Brand Name: RedconItem Name: CM921S Satellite ReceiverBand: 2.4GHzFeatures:Use dual-channel wireless frequency-hopping technologySupportpreset full channel protectionCompatible with all the DSM2/DSMX receiver, compatible withAR6210, CM921, AR9020, AR8000, AR12120Compatible withSpektrum and JR 2.4G transmitterBinding Procedure:1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LEDs should illuminate.2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the
transmitter.3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programmed correctly now.4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.General Notes:Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after succe
transmitter.3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programmed correctly now.4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.General Notes:Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after succe
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark