United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
FlySky FGr4P 2.4GHz 4CH AFHDS 3 RC Receiver PWM/PPM/I.bus/S.bus Output
For RC Car Boat
FlySky FGr4P 2.4GHz 4CH AFHDS 3 RC Receiver PWM/PPM/I.bus/S.bus Output for RC Car BoatOVERVIEW:The FGr4P uses AFHDS 3(Third Generation Automatic Frequency Hopping Digital System). It uses a single antenna with two-way transmission capabilities and is designed to be compact and easy to install. It can output standard PWM, i-BUS and PPM.Description:Brand Name: FlySkyItem Name: FGr4P ReceiverDimensions: 29 * 22 * 16.2mmWeight: 20gPWM channels: 4CHWireless frequency: 2.4GHzWireless protocol: AFHDS 3Range: 200m (ground)Antenna type: single antenna (150mm)Power: 3.5-8.4VRSSI: SupportedData port: PWM / PPM / i.bus / s.busTemperature range: -10 ℃+ 60 ℃Humidity range: 20% -95%Online Update: YesCertification: CE, FCC ID: N4ZFGR4P00CH 1-CH 4: Connects the servos, power supply or other
componentsi-BUS: for channel expansion or connect sensorsBIND: For bind cableBattery: Connect the batteryBinding:1. Insert the bind cable into the receivers bind port2. Plug the power cable into any other port, and the receivers LED will start to flash quickly indicating that it has entered bind mode3. Put the transmitter into bind mode; (See the transmitters instruction manual for more information)4. Binding is successful when the receivers LED will stop flashingRemove the power and bind cables from the receiver.5. Reconnect the power cable to the receiver6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps abov
componentsi-BUS: for channel expansion or connect sensorsBIND: For bind cableBattery: Connect the batteryBinding:1. Insert the bind cable into the receivers bind port2. Plug the power cable into any other port, and the receivers LED will start to flash quickly indicating that it has entered bind mode3. Put the transmitter into bind mode; (See the transmitters instruction manual for more information)4. Binding is successful when the receivers LED will stop flashingRemove the power and bind cables from the receiver.5. Reconnect the power cable to the receiver6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps abov
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark