Description: Item Type: Injection Pen Set
Material: Metal
Colour: White + Blue Capacity: 1ea Length: App 135mm Diameter: App 28mm Package Weight: App 685g Package Included:1 x Injection Pen 1 x Pressurizer 1 x Syringe 1 x Conversion Head Usage:1. Take out the instrument & put it on the table.2. Put the injection pen in the pressurizer.3. Press the push rod down to the end & pressurized finish.4. Remove the switch head & syringe from the sterile bag.5. Connect the switch head to the syringe & tighten the reinforcement to the right.6. Put the switch head into the bottle & use the piston to pull out of the requireddosage.7. Adjust the corresponding gauge line with the injection pen.8. Tighten the syringe clockwise in the injection pen.9. If there is a bubble in the syringe, gently tap it with your finger to make the bubblerise to the top.10. Take the instrument vertically, rotate the bottom of the instrument to the right, shoot the gap andthe air until the water drops on the syringe.11. The instrument is aimed at the fixed point & the corresponding force, theinjection is done bythe injection key, use the medical cotton swab to press the needleeye for a minute, do not rub. Notice:1. Please sterilized before use.2. Avoid contact with eyes.3. Keep out of reach of children.4. Always place he stabilizer perpendicular (90° )to the surface of the skin when applying.
Features:1. This advanced micro injection pen has no needle & avoids any invasive, itadopts the pressure technology, burst