Only US$16.99, buy best hobbyfly 1s bt 2.0/ph 2.0 lipo battery series charging board parallel charge board blade inductrix ultra micro jst-ph connector for betafpv battery charger sale online store at wholesale price. ...

Only US$17.99, buy best hobbyfly gnb 27 jst-ph 2.0 connector 1s lipo battery balance parallel 6 channel charging board sale online store at wholesale price. ...

Description: Basicinformation Brand: Hobby Plus Item No:RAVAGE-10TRScale: 1/10
Colour: Green Power System ESC:60A brushed
...

Specification: Input: AC 170-264V 50/60 Hz Output: 24V 16.7 A Power: 400W
Size: 21.5x 11.3x 4.8 cm Packaging Included:1
...

Hobbyporter 8743F Carbon Fiber 3-blade Quick Release Foldable Propeller for DJI Mavic 2 Pro/ Zoom RC Drone 2 Pairs Description: Brand Name: Hobbyporter Item Name: 3-blade Foldable Propeller
Material: Carbon Fiber
Colour: AS Shown
Size: 8743x 3 Quantity: 2 Pairs 4 Pcs Weight: 68g Usage: for DJI Mavic 2 Pro/ Zoom RC Drone

Features:- Two Pair of highly efficient 8743 Three blade propellers that offer an attractive looking upgrade to your Mavic 2 Pro or Mavic 2 Zoom.- These Propellers offer longer flight times thanks to their enhanced design using lighter & stronger materials compared to the original propellers supplied with the DJI products. Package Included:4 x 3-blade Propeller




...

Hobbyporter WT8 2.4 Ghz Mode 2 Transmitter with Receiver for Tinyhawk Tinyhawk S TRASHCAN Mobula 7 UR65 Cine Bee Overview: This product is a professional radio for drone racer. Achieved high precision control & the best product for FPV flying. It provides not only the best control experience but also upgrade in a safety way. We strongly advice to take out the propellers before any upgrade or fine tuning. Make sure DO NOT fly in any crowds /breakable/flammable area. Specification: (Transmitter) Brand: Hobbyporter Model: WT8 Mode: Mode 2 Frequency:2.4 Ghz Frequency Hopping: Latest FHSS (64 points, 3.6ms) Channels: 6 channels Resolution: 4096 Transmission: 100mw (20dbm) Distance: 1000m (depends on actual situation) Working Voltage:4.2-6v (AAA1.5v*4) Working current: 100-150m A
Size:162*110*62MM
Colour: Graffiti/ Flame/ Camouflage Color Application: Helicopter, fixed wing, multi rotor, robot, car, boat Specification: (Receiver) Model: WT8 S Frequency: 2.4 Ghz Frequency Hopping: latest FHSS (64 points, 3.6ms) Channels: 8 channels Resolution: 4096 Working voltage:3.8-6v Working current: 70m A Protocol: compatible with Sbus, ppm
Size:17*11*2mm Weight:1.2g Application:helicopter, fixed wing, multi rotor, robot, car ATTENTION: If warning alert signal happens on the radio & the plane! Please check your system carefully before taking off. Please make sure the initial interface is showed to avoid any change in setting accidentally. Turn off the receiver power first then radio power off. To avoid failsafe to hurt anybody. Nor/ Rev set up: Remarks: ev


...

Only US$163.99, buy best hobbywing 160a wp-6bl 160 8s rtr brushless sensorless waterproof esc speed controller for 1/6 1/7 touring truck rc car vehicles models parts sale online store at wholesale price. ...

Hobbywing 2-3S External 8A MAX 15A UBEC Switch Mode Description: The 8A-UBEC is a switch-mode DC-DC regulator works with a 2-3S Lipo battery, it outputs a consistent safe voltage for your receiver, gyro & servos. It is very suitable for large scale RC models with many servos such as nitro powered RC helicopters & airplanes. Specification: Brand Name: Hobbywing Item Name: External 8A UBECOutput Voltage: 5V or 6V (Changeable with a switch ) Continuous output current: 8 Amps Burst output current: 15 Amps Input: 6V-12.6V (2-3S Lipo battery) Quiescent current: 60m A
Size: 42mm*39mm*9mm (length*width*height) Weight: 36g

Features:- Uses advanced switch-mode DC-DC regulator IC.- The output current is very large to supply all electric equipments.- Output short-circuit protection function.- A metal shield & a filter significantly reduce the electromagnetic interference.- Automatically detects the amount of the Lipo battery pack (2S or 3S).- Shows the battery capacity with 4 LEDs.- Shows the working status with a LED, it lights when the UBEC works normally.- There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver.- With a step-down voltage regulator of 0.7V down as accessory (It changes the output from 6.0V to 5.3V for some special equipments that cannot work with 6V inputs). English Manual, please Click Here Package Included:1x Hobbywing 8A UBEC


...

Description: Mounting hole inner diameter: 2.5m screw hole (with brush 380)2440 Brushless Motor 4 Pole Mounting holes are identical for 380 brushed motors (but not for 380 motor radiators). This motor & ESC can be mounted with a 380 brush motor. Compared with the same size 2 pole motor, the heat is lower, the torque is stronger, the low speed linear is better, the power is saved, & the power is more than 80%.40A Hobbywingwater & cold electricity Hobbywinghaiwang 40A ship water-cooled two-way ESC100% Brand new! Motor end banana plug: 3.5mm Battery end plug: T plug The plug has been soldered & it is waterproof & can be used directly. Can be used in the flywheel 012 009 to change the brushless ESC wind rescue boat ESC Haoying 40A-V2 marine ESC. Support voltage: 2S
- 3S Libattery
Volume: 74*25*14.5mm Water cooling nozzle outer diameter: 4mm Use connecting pipe

Size: 3x 5mm Weight: 46g Motor water cooling 2440 brushless motor Model: 2440 (size asbrush 380 motor) Motor kv value: 4600KVShaft diameter: 2.3mm (D-axis) Out shaft length: 12mm Motor outer diameter: 24mm Motor length: 40mm Power: 300 W Voltage: 2S
- 3S lithium battery Mounting hole distance: 16mm (hole center distance) Mounting hole inner diameter: 2.5m screw hole (asbrush 380)24mm watercooling 1. Water-cooled sleeve inner diameter: 24mm, suitable for 24mm outer diameter brushless motor, such as 2435, 2440, 2445 brushless motor 2, length: 29mm 3, copper mouth outer diameter: 3.86mm 4, outer diameter: 29mm Package included:1x Motor 1x ESC




...

Hobbywing 3 in 1 Professional Multifunction LCD Program Box it can work individually or connect with PCSetup your favorite model like a Pro Team Engineer To fully unleash the power of Hobbywing ESC, this Program Box is a must-have. You can quickly access option menu in the ESC & make the best setup like Start-up mode, brake force, no. of battery cells, etc. If you want to do it the " Hi-Tech" way, you can connect the ESC to this Program Box, then use the USB (Universal Serial Bus) cable to connect the Program Card to your PC, with the CD-ROM that came with the Program Box, you can view detail info & adjust ESC settings just like a real engineer in a " Pro Team", looks fancy & very efficient. Description: Displayer: 16x 2 characters LCDInterface: Mini USB (Universal Serial Bus) interface, ESC interface, Power supply interface Power supply: DC 4.5V to 12.6V (If the ESC hasn't a built-in BEC, you must use an additional battery pack to supply the program box) Weight: 84g Dimension (mm): 90 x 51 x 17 Suitable for: XERUN Series Car ESC (V2.0 / V2.1), EZRUN Series Car ESC (V2.0 / V2.1), PLATINUM Series Quadcopter/ Aircraft ESCWorking Modes Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen. Works as an USB (Universal Serial Bus) adapter to link the ESC with a PC to update the firmware of the ESC or set the ESC by HOBBYWING USB (Universal Serial Bus) LINK SOFTWARE. Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell. The programmable items for the RC-CAR ESC are: Running Mode Drag Brake ...