i Range X BM01 Simple Tiny Bind Module for Spektrum DSM2 DSMX Satellite Receiver Specification: Brand name: i Range X Mode: BM01 Item name: Bind Module for Spektrum satellite DSM2/X receiver
Size: 21mm*14mm*6mm Weight: 1.2g Power Support: 5V USB (Universal Serial Bus) input Power Output: 3.3v or 5v Interface: 1.5mm 3pin Standard Spectrum connector 4pin 2.54 solder pin

Features:- Compatible Spektrum dsm 2/dsmx satellite receiver- 5V USB (Universal Serial Bus) power, No additional power required- Micro & Portable- Plug USB (Universal Serial Bus) getting to DSMX binding mode- Holding the button & plug USB (Universal Serial Bus) getting to DSM2 binding mode LED MODE:1. Flashing once + breathing once, DSMX 2048bit/11ms (default)2. Flashing twice + breathing once, DSM2 2048bit/11ms (hold button when powered up) Package Included:1 x i Range X BM01 Bind Module


...

i Range X D8SB Fr Sky Compatible PPM SBUS Mini Receiver for Traranis Taranis Plus XJTDescription: Brand name: i Range X Item number: D8SBOperating Current: 68m A @5 V Operating Voltage: 3.3 ~10V (5V Normal operating Range)weight: 0.9g
Size: 24.5*12.4MM*2MMOperating Temperature Range: -10℃~60℃ Compatibility: Traranis & Taranis plus XJT module, DJT, DFT Module
Features:* S. Bus compatibility.* PPM Compatibility.* 0.9g Ultra light weight layout.* 1KM far Reaching Range.* Incredibly compact for Tight Installs.* Frsky compatible: Traranis, Taranis plus XJT module, DJT, DFT Module. Binding process: Binding to Fr Sky Taranis 1. please make sure Transmitter in Model Configuration (Page 2), Go to Mode inside Internal RF & select D8.2. Press & hold the receiver bind button & plug your battery in to turn the receiver on.3. Release the button LED on 4. Going back to the Taranis, & press BIND The transmitter beeps, in binding process, LED Off binding completed.5. Turn off & on both transmitter & receiver, enjoy flight! Binding to XJT Module 1. Using the dip switches of the XJT module, select the D8 mode.2. Below steps following:3. switch 1 = ON, switch 2 = OFF.4. Press & hold the receiver bind button & power up receiver.5. Release the button green LED ON6. Press & hold the bind button & turn the transmitter on.7. Release the button green LED blinking, in binding process.8. Green LED off binding completed.9. Turn off & on both transmitter & receiver, enjoy flight! Connecting to Clean fl

...

Only US$8.99, buy best irangex expresslrs elrs 2.4ghz nano rx crsf sbus ultra-low latency open-source receiver for radiomaster pocket tx 16s mark ii jumper t-pro t 20 t 20s radio transmitter sale online store at wholesale price. ...

i Range X Fli 14+ Flysky Receiver AFHDS-2A w/ RSSI OSD Double Antenna 500m Distance for FS-i 6 FS-i 6SDescription: Brand Name: i Range X Item Name: Fli 14+ RXChannel: 14 Protocol: AFHDS-2A2.4G Mode: The second generation of an enhanced version of the automatic FM digital system Antenna Length: 70mm (Dual Antennas) Input Power: 4.0-6.5V DCWeight: Only 1.7g
Size: 25mm*15mm*5mm
Colour: Black Signal Output: IBUSRSSI Output: Channel 14 No ground interference (Transmitting & receiving 1 mfrom the ground): 500m

Features:- Customized for Betaflight- RSSI Display Via OSD without any hack compatible with all Flysky AFHDS-2A protocol transmitter- Telemetry output: RSSIRX Battery- Support RSSI Via Channel 14 (Aux 10 in Betaflight)- Best for FPV Racing drone- Compatible with FS-i 4, FS-i 6, FS-I6X, FS-i 6S, FS-i 10, FS-i T4S, Eachine I6, Turnigy I6S, Turnigy Evolution Binding Procedure:1. Power for the Fli 14 Receiver while press & holding the bind button 2. The LED will blinking fast, this indicates the receiver is in binding mode 3. Get the Flysky transmitter into binding mode, the LED on the receiver will getting to be solid & this indicates binding successfully Receiver Configuration:RSSI: Package Included:1 x Fli 14+ RX



...

i Range X FX801 FASST S.BUS CPPM Dual Antenna Compatible Mini Receiver for Futaba Description: Brand Name: i Range X Item No.: FX801 Item Name: Fasst Dual Antenna Compatible Receiver Channel: 8CHRange: full range 400m+ Operating Current: 50m A max Operating Voltage: 3.6 ~8.4 V Latency: S.BUS mode:14m S @ FASST multi-channel mode, 16m S @ FASST 7ch mode CPPM mode: 21m S @ FASST multi-channel mode, 24m S @ FASST 7ch mode Sensitivity: about -90d Bm Weight: about 3g
Size: L*W*H=30mm*14mm*3mm Output mode: S.BUS or CPPM can be selected
Features:S.BUS output can easily cooperate with any S.BUS support flight control system. CPPM output support some CPPM input flight control system.13.6m S latency under S.BUS output mode (default status), 20.4m S latency under CPPM output mode. Up to 8 channels support. Only 3g, compatible with all FASST FUTABA Transmitter Dual antenna, more stable, more than twice the original, effective distance is 400 meters With 4 custom lines for CC3D, NAZE32, F3 & other flight controller Instruction Manual: Click Here Package Included:1x i Range X FX801 Fasst S.BUS Dual Antenna Mini Receiver 4x cables

...

Only US$19.52, buy best irangex irx 4 expresslrs elrs 2.4ghz opentx edgetx open-source systems nano tx module for frsky x-lite radiomaster pocket jumper t-pro radio transmitter sale online store at wholesale price. ...

Only US$32.99, buy best irangex irx 4 lite cc 2500 nrf 24l 01+ a 7105 cyrf 6936 4 in 1 multiprotocol tx module for frsky x-lite sale online store at wholesale price. ...

Only US$31.99, buy best irangex irx 4 plus 2.4g cc 2500 nrf 24l 01 a 7105 cyrf 6936 4 in 1 multiprotocol arm tx module with case sale online store at wholesale price. ...

Only US$5.99, buy best irangex irx 6 multiprotocol transmitter tx module for flysky fs-i 6 i 6x transmitter sale online store at wholesale price. ...

i Range X i RX6 Multiprotocol TX Module for Flysky FS-i 6 i 6x Transmitter This Multiprotocol TX Module is suitable for many brands quadcopters, helicopters & airplanes. You can control RC quadcopters, RC helicopters or RC airplanes flexibility when you insert the TX Module to your Flysky transmitter. You will get many new ways to control the RC models. Description: Brand name: i Range X Item number: i RX6 Item name: Multi-protocol TX Module Signal frequency: 2400-2483.5 Mhz Controllable range: 100m Input voltage: 3.7-4.2V (1S battery) Supported remote controls: Flysky FS-i 6 FS-i 6XSupported Remote control channel order: AETRSupported brand: Cheerson, Syma, Wltoys, Eachine E010 (Most of these brands quadcopters, helicopters & airplanes are compatible but not every model. Specific models please check instruction under the note) Binding Procedure:1. Creat a model in Open TX using external module, 12 channels & AETR sequence order.2. Turn off Transmitter.3. Power up quad.4. While holding the appropriate stick pattern listed below, power up Transmitter. Note: This Multiprotocol TX Module only supports remote control of AETR remote control channel order. More instruction of Multiprotocol TX Module, please click here Package included:1 Xi Range X i RX6 Multiprotocol TX Module ...