Specification:- Frequency rage: IMHZ
- 8000MHZ- Detection dynamic range: 73DB- Detection sensitivity: ≦0.03mv (main frequency band)-
...

K6H Tuya Wi Fi Smart Thermostat Electric Floor Heating TRV Water Gas Boiler with LED Touch Control Temperature Voice Remote Controller with Alexa Google Home ...

K6H Tuya Wi Fi Smart Thermostat LED Touch Screen Electric Floor Heating TRV Water Gas Boiler Temperature Voice Remote Controller with Alexa Google Home ...

K7 Tuya Wall Plug-In Camera Wifi 360° 1080P Mini Surveillance Home Security Protection Night Vision LED Lamp Light IP Cameras EU Plug ...

K75 Lavalier Headset bluetooth Earphone Intelligent Call Noise Cancelling 20H Playback LCD Digital Display Clips-on Wired In-ear Lavalier Headphones ...

K8 KBAR VBAR Gyro APM bluetooth Module Transeiver Helicopter Parts Description: Name:bluetooth Module-Adjust parameters, settings-For K8 KBAR VBAR Gyroscope & APMStep to connect:1) Connect the wiring, power up, while the device is not connected, the bluetooth module board has a white LED flashing 2) At PC side, search bluetooth device.3) Found name called LINVOR device 4) Connect it, & passcode is 12345) While connection is ok, you can see the LED become always on. Package Include:1xbluetooth Module ...

Description:1. USB (Universal Serial Bus) Plug. Universal computer, mobile phone charging head, power bank.2. Highlight Spotlight. Built-in bright diode light source, low power consumption.3. Waterproof & leak-proof. The sturdy case has a waterproof glue process.4. Sound-activated Driver. 5V Driver, in sound-activated mode, music sound-activated sensor lights flash.5. Freely Adjustable Bracke. The starry sky lamp can be adjusted up & down by 90, suitable for different directions. Specification: Product model: K8 Type:starry skylight withremote; meteor light with remote Light
Colour: Red Laser power: 100mw Working temperature: -20 ℃ -70 ℃ Working voltage: 5V DCAdhesive temperature: -40 ℃ -120 ℃ Adjustable angle:90 Waterproof rating: IPX4 Installation position: rear position of armrest box Line connection: USB (Universal Serial Bus) socket Packing box

Size: 14.5 * 10 * 4CMInstallation Steps (installed in the armrest box):1. Peel off the sticker & stick it to the bottom of the bracket 2. Fix the host to the position of the armrest box, & adjust the irradiation direction up & down 3. Plug the power cord directly into the USB (Universal Serial Bus) socket 4. Installation is complete Package Included:1 X Star Light 1 X Accessories (show as the picture)


...

K8 Smart Touch Headset Wireless bluetooth 5.4 Earphone with LCD Color Display 4-Mic ENC Noise Cancelling 600m Ah Battery Built-in MP3 Music Support TF Card Playback Multi-language Semi-in-ear Sports Headphones with Lanyard ...

Thismodulecanbeusedtoadjustparameterortransmitdatafor V Bar, KBar, APM, Pix Hawketc. Description: Name: K8 V8 KBAR VBAR APM PIXHAWK Flight Control bluetooth Module High-voltage Version Power Supply:4-6 Vfornormal (Green)version, 4-12 Vfor High-voltage (Blue)version Baudrate:9600for V Bar, 57600for APMand Pix Haw K Range:about 10meters For VBar or KBar user: You can download the App from google play or mikado:http://www.mikado-heli.dehttps://play.google.com/store/apps/details?id=info.vstabi.vbarandroid After install the App, Please follow these steps to use this device:1, Please connect the device to your VBar as the picture below.2, Power on your VBar, Turn on the bluetooth of you phone (or PC).3, Use the password 0000 (1234for HV version) to pair with this device.4, Open the App, select correct bluetooth device (HC-05 or SPP-CA). The VBar will connect to your Pone in about 15 seconds. For APM or Pix Hawk user: You can download the App from google play:https://play.google.com/store/apps/details?id=org.droidplanner After install the App, Please follow these steps to use this device:1, Please connect this device to the telemetry port of your flight controller.2, Power on your flight controller, Turn on the bluetooth of you phone (or PC).3, Use the password 0000 (1234for HV version) to pair with this device.4, Open the App, set connection type to bluetooth & press the Connect button on the main page. The flight controller will connect to your Pone in a few seconds. If had been connected to other bluetooth device ...

Description: Name: Car Wireless Charger
Material: PC+ silica gel
Colour: black, silver Installation: clamping

...