Description: Full Spectrum 30W LED Grow Light Desk Clip With 360 Flexible Swivel Gooseneck Plant Growing Lamp 40PCS High-efficiency LED Chips & full spectrum lighting, it can provides the most efficient wavelengths of light to enhance photosynthesis performance hence improving plants healthy growing.supply the most efficient wavelength to enhance photosynthesis performance, energy saving, high luminous efficiency & long service life. This lamp usually used for balconies, greenhouses, darkroom, office, widely apply to sprouting, blooming, fruiting & promoting the leaf, can rapidly improve the health of plants. Especially when the plant needs extra light when raining, snowing, dark indoor. High efficiency & eco-friendly, the 30W bulbs are led which has lower power consumption & higher luminous efficiency. You can use the plant grow light as a regular desk lamp also, perfect for bedrooms & other places. Specification: Item Plant LED Grow Lamp Power 30 W Voltage AC 100-240VLED Quantity 40pcs: 22 Red (620-660nm)+12 Blue (440-460nm)+2 White (3500K-6000K)+2IR (730nm)+2UV (380nm) Control Mode ON / OFFMaterial Aluminium Alloy Specturm Full specturm, 380-780nm Size 5.8 cm x 37.5 cm / 2.28 x 14.76 Weight 100g Life Span Over 35, 000 hours Function Ultra bright, lower heat & lower power consumption, high luminous efficiency & long service life. It is easy to adjust the light towards any directions if the plants need.360 Degree Flexible Gooseneck is to aim the light in the right direction andattached to a s ...

Only US$10.78, buy best full spectrum 50 led grow light flood lighting lamp for plants sale online store at wholesale price. ...

Feature: Widely used in culture solution, gardening, potted plants, especially when the plant needs extra light when raining, snowing, dark indoor, etc. Better Heat Dissipation:which has excellent heat dissipation, no need cooling fans, runs quietly.IP65 Waterproof makes the light will be suitable for more grow environments, especially for hydroponics, greenhouse, commercial growing project etc. It provides a perfect solution for indoor plants that arent getting enough sunlight. Specification: Body

Material: Aluminum Power: 50/100 WWaterproof: IP65 Is Dimmable: No Voltage: AC220 V Viewing angle: 180LED Type: 5730smd Brightness: 60lm/WPackage included:1x LED Grow Flood Light

...

null
Features:1. Can be connected with AC220-240V directly, no power driver required.2. Aluminum material, fast cooling.3.
...

Feature:-For all kinds of flower plants: tomatoes, chilli, eggplant, Rose ect.-For all kinds of greens: herbs & leafy vegetables, lettuce, bok choy ect.-Also suitable for Indoor garden or indoor potted landscape. Specification: Power: 50WLED QTY: COBWave Length: 380-840nm Brightness: 4500lm Waterproof Grade: IP65 Voltage: AC110V/220V
Material: aluminum Package Included:1x LED Grow Light
...

Feature:- The full spectrum is more versatile & suitable for vegetables, tomatoes, etc.- Good heat dissipation, 2 fans, long service life- High efficiency lamp bead chip Specifications:- LED lights: 100PCS 3030 SMD (84 Red+10 Blue+2 White+2UV+2IR)- Power: 600W- Color Temperature: 8500K- Dimension: Grow Light :26 x 26 x 4 (cm)- Rope Hanger:20cm- Cable:170cm- Coverage Area: 4.5M- Lifespan: 50, 000hours- Input voltage: 85-265 (V)- Protection level: IP55- Working environment: -20~40degree;45%~95%RHPackage
Includes::- 1 x 600W LED Grow Light- 1 x Power Cord (US/UK/EU Plug)- 1 x Rope Hanger Using tips:- Recommended lighting time & height- Seedling Stage: 16-18 hours on, 36-59inch- Vegetative Stage: 12-16 hours on, 18-36inch- Flowering Stage: 10-12 hours on, 12-18inch- The lighting time & height can be adjusted according to site environment & specific plant plants Attention:- Indoor use only, not water-proof.- The working environment: -20~40℃, 45%RH~90%RH.- Extremely bright, do not look directly at the LED bulbs when the light is working.-To protect the light, Pls cut off the power when there is a lightning.
...

Full speed 16x 16mm FSD-Baby F3 Tower 2S Flight Controller OSD 5V/1A BEC6A BLHELI_S ESC Dshot 600 Specification: Brand name: Full speed Item name:FSD-Baby F3 Tower Mounting hole: 16x 16mm, 2mm diameterpackage

Size: 6x 8x 2 cm Package weight: about 5.5g Lipo: 2s F3 flight controller:
Size: 20*20*5mm FC weight: about 2g BEC: 5V/1 A Compatible receiver: DSM/PPM/SBUSProcessor: F3 Working voltage: 2S lipo (7.4V) Sensor: MPU6000 Built-in Betaflight OSDFirmware version: Omnibus F3 Betaflight 3.1FC

Features:-Support LED programming-Support DSHOT 600 ESC protocol-Supports low-voltage alarm-Bulit-in OSD-Support buzzer alarm function-Suppot reciever: SBUS/PPM/DSMX...4 in 1BLHELI_S2S ESC:
Size: 20mm*22mm*5mm ESC weight: about 2g Firmware version: BLHELI_S 16.6 Lipo: 2 S Con. current: 6 A Peak current: 7A (10S) Support DSHOT 600 ESC protocol Suitable for small wheelbase racing dronepackage included:1x ESC1x flight controller 8x M2*5+5 nylon column 4x M2 nylon screw nut 1x pin cable





...

Full Speed 20x 20mm FSD328 Flytower F3 Flight Controller AIO OSD BEC28A BL_S DShot 600 4 in 1 ESCSpecification: Brand Name: Full Speed Model: FSD328 Item Name: 20x 20mm F3 Flight Controller 28A ESC Flytower Tower Weight: 8g Omnibus F3 Flight Controller (Top Level):MCU: STM32MPU: MPU6000 Working Voltage: 2-4S Lipo OSD: Betaflight OSDBEC: 5V @ 3 A Firmware: Omnibus F3 Betaflight DShot
Size: 27x 27x 5mm Mounting Hole: 20x 20mm (M2) Weight: 3g- Support DSM / PPM/ SBUS Receiver 28A 4 in 1 ESC (Bottom Level) Con. Current: 28 A Peak Current: 35A (10S) Firmware: BLheli_SInput Voltage: 2-4S Lipo
Size: 31x 31x 5mm Mounting Hole: 20x 20mm Weight: 3.7g- Support Oneshot 42, Oneshot 125, Multishot, Dshot 150, DShot 300 & DShot 600 Package Included:1x F3 Flight Controller 1x 28A 4 in 1 ESC8x M2*5+5 Nylon Standoff 4x M2 Nylon Nut 1x 6P Cable

...

Full Speed Bat-100 100mm Carbon Fiber Frame Kit With PLA Camera Seat Specification: Brand name: Full Speed Item name: Bat-100 frame kit Wheelbase: 100mm
Material: carbon fiber & PLAProduct weight: about 7.6g Package weight: 13g Product
Size:95mm * 80mm * 25mm Package
Size:13*12*1.5cm Top plate thickness: 0.8mm Bottom plate thickness: 1.5mm The spare frame for Bat-100 racing drone Recommended parts (package not included): Battery: 1s FC: 16*16mm mounting hole Motor: 07 series Package included:1x top plate 1x bottom plate 1x PLA camera seat 6x M2*5 nylon screws 3x M2*18 double pass nylon column 2x M1.2*6self-tapping screws


...

Full Speed F3SD Flytower Part 20x 20mm Omnibus F3 Flight Controller AIO OSDBEC for RC Drone Specification: Brand Name: Full Speed Item Name: Omnibus F3 Flight Controller AIO OSD BECMCU: STM32MPU: MPU6000 Working Voltage: 2-4S Lipo OSD: Betaflight OSDBEC: 5V @ 3 A Firmware: Omnibus F3 Betaflight DShot
Size: 27x 27x 5mm Mounting Hole: 20x 20mm (M2) Weight: 3g- Support DSM / PPM/ SBUS Receiver Application: Original parts for FSD328 flytower Package Included:1x F3 Flight Controller 8x M2*5+5 Nylon Standoff 4x M2 Nylon Nut 1x 6P Cable
...