United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Milight Infrared PIR Sensor Human Body Induction Automatic Light
Switch AC180-240V
Specification:Voltage:AC180-240V 50HzCurrent:0.01ASensor distance:8M(max.)Control distance:30MSensor angle:110Installation height:1.2-1.5mDimension:86*86*27mmFeature:PIRsensorswitchawirelessswitch, easytouseandinstallationwithoutwiringwiththelights, thesensingdistancecanreach8meters.ThePIRlampshavethefunctionofautomaticsignaltransiting.Thelampscansendeachothersignalwithin30meters, whichmakesthesensingdistancelimitlessHow to use:1.Preparation modeThe red indicator will be on when the switch is connectedto power, it turns into preparation mode, after 1 min, the red indicator will be gone, the preparation mode is finished, the switch stars to work properly.The redindicator will turn on again when it detects the movement of objects2.Link/UnlinkLink:When the switch is connected to power, press
SET one time, the red indicator will blink slowly, you are ready to link the lights to switch, switchoff the power of the lights which you want to link, turn to them again after 3 seconds, the lights will blink 3 times slowly, the link is done, press SET once again if you dontwant to link more lights.Unlink:if you want to unlink the lights which you have linked, do as below:When the switch is connected to power, hold SET for a while, the red indicator will blinkquickly, you are ready to unlink the lights to the switch, switchoff the power of the lights which you want to unlink, turn on them again after 3 seconds, the lights will blink 10 times quickly, the unlink is done, press SET once again if you dont want to un
SET one time, the red indicator will blink slowly, you are ready to link the lights to switch, switchoff the power of the lights which you want to link, turn to them again after 3 seconds, the lights will blink 3 times slowly, the link is done, press SET once again if you dontwant to link more lights.Unlink:if you want to unlink the lights which you have linked, do as below:When the switch is connected to power, hold SET for a while, the red indicator will blinkquickly, you are ready to unlink the lights to the switch, switchoff the power of the lights which you want to unlink, turn on them again after 3 seconds, the lights will blink 10 times quickly, the unlink is done, press SET once again if you dont want to un
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark