United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Wireless Remote Control Switch Relay Control Board 433.92MHz Lamp
Light Smart Home
The Remote control Specification:Model Number: KR2201DRF Frequency: 433.92Mhz.Input Voltage: AC 90V-250V.Modulation Mode: ASK.Receiver Sensitivity: -108 dbm.RF Working Mode: Superheterodyne Reception.Remote Control Range: 100 Meters (Open Space).Support Storing The Quantity Of Remote Control: 32 PCS.Support The Type Of Remote Control: Learning Code(1527), Fixed Code(2262).Working Mode: Momentary, Toggle and Latching.Wiring Connection Way: Fixed Wiring Pillar.Package Weight: 50g/1.76ozNote:This Product NO WIFI Function. Only RF 433.92Mhz FunctionHow to install this smart switch:You don't need to open the outer casing of this smart switchYou can wire directly to the terminal blockPlease note: Please turn off the power before wiring.Please connect the wires according to the following
diagramOperation Introduction:About Working Mode:Learning The Code (momentary):Press the learning key once, the LED on the Receiver will flash once.When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off.Indicates that they are successfully paired.Learning The Code (Toggle):Press the learning key twice, the LED on the receiver will flash twice.When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off.Indicates that they are successfully paired.Learning The Code (Latching):Notes: Latching mode require 2 different buttons, the first one for "ON", the second one for "O
diagramOperation Introduction:About Working Mode:Learning The Code (momentary):Press the learning key once, the LED on the Receiver will flash once.When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off.Indicates that they are successfully paired.Learning The Code (Toggle):Press the learning key twice, the LED on the receiver will flash twice.When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off.Indicates that they are successfully paired.Learning The Code (Latching):Notes: Latching mode require 2 different buttons, the first one for "ON", the second one for "O
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark