Realacc BETA210 210mm 4mm Arm Thickness Carbon Fiber Frame Kit with PDB & Battery Fixing Plate Note: this item doesnt include the camera & flight controller. Specification: Brand name: Realacc Item name:BETA210frame kit Wheelbase: 210mm
Material: carbon fiber Frame weight: 90g Bottom plate thickness: 4mm Aluminum alloy thickness: 3mm Battery fixing plate: 1.5mm Other plate thickness: 2mm Recommended parts (package not included): Motor:2204/2205/2206 (mounting hole: 16x 19)ESC: 20A -30 A Flight controller: F3 (mounting hole: 30.5x 30.5) Camera: EMAX camera VTX:TS5828 Remote control:FS-i 6SReceiver:FS-i A6 B Battery:4s 1500mah Propeller: 5inch 3-blade Package included:1x Realacc BETA210 210mm frame kit 1x Battery Fixing Plate 1x PDB8x M3*64x M3*84x M3*164x M3 screw nut 4x M3*27 aluminum column
...

Realacc Blackbird 140 140mm 4mm Arm Thickness Carbon Fiber Frame Kit with PDB & Battery Strap Specification: Brand name: Realacc Item name: Blackbird 140 frame kit Wheelbase: 140mm
Material: carbon fiber Net weight: about 35g Bottom plate thickness: 4mm Top plate thickness: 2mm Side palte thickness: 1.5mm Recommended parts (package not included): Motor: 1306/1407/1806 (mounting hole: 12x 12)ESC: 4in 1 Flight controller: F3 (mounting hole: 30.5x 30.5) Camera: micro EMAX camera Battery: 800/900mah Propeller: 3inch 3-blade Package included:1x Realacc Balckbird 140 140mm frame kit 1x PDB1x Battery Strap 4x M3*68x M3*84x M3*30 aluminum column
...

Realacc Blackbird 210N 210mm Normal X Racing Frame Kit 5mm Arm Carbon Fiber w/ PDB 5V12 V Description: Brand name: Realacc Item name: Blackbird 210N racing frame kit
Width: 210mm Empty frame weight: 90g
Material: carbon fiber Thickness of arm: 5mm Thickness of upper plate: 2mm Thickness of side plate: 1.5mm Thickness of bottom plate: 2mm Thickness of frame arm top plywood plate: 2mm Standoffs: M3*30mm
Features:3K high strength carbon board to ensure that the framework is strong.5mm thickness frame arms design. Normal X frame, suitable for racing & freestyle flying. Supports Run Cam Swift camera. With a PDB (5/12v output) Recommended parts (not included): Flight controller (F3/ F4, mounting holes: 30.5*30.5) Brushless motor (2204/ 2205/ 2206, mounting holes: 16x 19) Brushless ESC (20A-30A) Propellers (5 inch) Battery (4S 1500m Ah) Camera (Run Cam Swift) Note: this is the frame kit that comes without any power equipment configurations. Package included:1 x Blackbird 210N racing frame 1 x PDB 5V12V1 x battery strap


...

Realacc Carbon Fiber Battery Protection Board with Tie Down Strap for X Frame kit Specification: Brand name: Realacc Item name: Battery Protection Board with Tie Down Strap Suitable for X Frame kit Board

Size: 64x 34mm Tie Down Strap long: 200mm Weight: 8.55g Package Included:1 X Battery Protection Board 1 X Tie Down Strap

...

Realacc Crow 140mm Wheelbase 4mm Arm FPV Racing Frame Kit 58g Specification: Brand name: Realacc Item name: 140mm frame kit Wheelbase: 140mm Up board: 2mm Side board: 2mm Bottom board: 4mm Top side board: 3.5mm Top board: 1mm Weight: 58g Recommend parts (Not included): Motor: 1306/1407/1806 (hole: 16x 19)ESC: 10-30 A Propeller: 3 inches Camera: 1177 camera Flight controller: F3 / F4 30.5X30.5MM 20X20MMBattery: 4S 1500m Ah Package Included:1 X Frame kit ...

Realacc F3 V1.0 Betaflight Brushed Flight Control Board Integrated OSD with Buzzer STM32 F303 MPU6000 SPISpecifications: Brand Name: Realacc Item Name: Flight Control Board
Size: 20mm*28mm Weight: 2.2g Processor: STM32 F303 CCT6 Sensor: MPU6000 Firmware Version: Betaflight_3.0.1_OMNIBUSPower supply: MAX 4.2V (1S) Lipo Battery

Features:-SBUS/PPM/DSM input-LED_STRIP solder pin-BUZZER solder pin-OSD pin (Camera input, 5.8G FPV output)-USB interface (On-line parameter tuning)-Built-in OSD (Using F3 MCU controls OSD over SPI bus in DMA mode)-Built-in Step-Up Voltage Power Module, Output 5V 500MA.-With 4 large current NMOS transistors, operating current of up to 10A each Receiver configuration:1.SBUS & DSM receiver input, please configure RX3 as input interface.2.DSM receiver power from 3.3V.3.SBUS & PPM receiver power from 5V. Package included:1 x Realacc F3 Brushed Flight Control Board


...

Realacc Fire Retardant Lipo Battery Bag (220x 155x 115mm) With Handle This bag made from super strong fire retardant fiberglass woven fabric & will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread & have a zippered lid. Offers extra protection for you, your equipment & your charging location, explosion & flame resistant Description: Item Name: Lipo-Battery Fireproof Bag
Material: Fire retardant fiberglass woven fabric Length: 220mm
Width: 155mm
Height: 115mm Weight: 140g Usage: Explosion-Proof bag for rc aricraft battery Upgraded Black Version, Click Here Package included:1x Realacc Fireproof Lipo Battery Bag with handle


...

This bag made from super strong fire retardant fiberglass woven fabric & will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread. Offers extra protection for you, your equipment & your charging location, explosion & flame resistant. Withluminous strap. Description: Item Name: Lipo-Battery Fireproof Bag
Material: Fire retardant fiberglass woven fabric Length: 215mm
Width: 155mm
Height: 115mm Weight: 191g Usage: Explosion-Proof bag for rc aricraft battery Package included:1x Fire Retardant Li Po Battery Portable Safety Bag


...

Only US$6.99, buy best realacc fireproof waterproof lipo battery safety bag (155x 115x 90mm) with luminous handle sale online store at wholesale price. ...

Realacc Four Arms Aluminum Alloy CNC Soldering Station Rose Black Green Blue Orange Red violet Specification: Brand name: Realacc Item name: Soldering Station Aluminum alloy base: 94*94*13.5mm Universal joint pipe length: 250mm Aluminum alloy base
Colour: Blue, violet, black, red, rose red, green, orange, violet (choice) Package Included:1 x Aluminum alloy CNC base 4 x Arm 4 x Non-slip mat 1 x User Manual
...