Description: This Electronic Speed Controller (ESC)is designed for use with brushed motors in RC Crawlers only. This high-power system for RC Crawler can be dangerous if used incorrectly, so please read this manual carefully. We can t control the correct use installation, application, or maintenance of this product, no so no liability shall be assumed nor accepted for any damage losses or costs resulting from the incorrect use of the product. Any claims arising from operating, failure or malfunctioning etc will be denied. We assume no liability for personal injury, consequential damages resulting from incorrect use of our product Features 1. Specially designed for RC Crawler with Brushed motor, excellent throttle linearity & driving feel 2. Compatible with brushed motor only 3. Low internal nce, excellent heat dissipati 4. Multiple protection
Features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Thrott I signal loss protection 5. Easily programmed & compatible with pocket-sized program card ESC Specifications 1. Cont. current/ burst current 80A/360a 2. Resistance:0.0014ohm 3. Motor Type: brushed motor compatible only 4. Battery: 2-3 cells Lipo, 4-9 cells Ni MH5. Suitable Car Type: 1/10 Crawler Brushed 6. BEC: 7. 4V/2A (switch mode)7. Product Dimenison:32*37*18mm, weight:about 42g 8. For the manual, please click here to download Instructions 1. Connect BEC wires (three small wires with black plug) to the receiver ensuring the correct orientation 2. Connect motor wi