TINSLY-X60 248mm Wheelbase 6 Inch Carbon Fiber Frame Kit 4mm Arm for RC Drone FPV Racing Notes:this item only comes with frame kit, not including any eletronic equipment. Specification: Item name:TINSLY-X60 frame kit Wheelbase: 248mm
Material: carbon fiber Weight: 83g Arm thickness: 4mm Recommended propeller: 6 inch Package included:1x TINSLY-X60 frame kit
...

Tinting Perforated Mesh Film Fly Eye MOT Legal Tint Headlight Rear Lamp 40x 106cm Specifications:
Size: Approx. 40 x 106cm
...

Tinting Perforated Mesh Film Sticker 60x 106cm for Tint Headlight Rear Lamp

Features:-Water Resistant-UV Stable-Suitable

...

Tiny 2.4G 6CH Receiver Compatible with DSM2 PPM Signal Output for Eachine QX80 QX90 QX95 Description: Item Name: Tiny DSM2 Receiver Channels: PWM 5CH, PPM 6CHReceiving Sensitivity: -99d Bm Frequency Range: 2.4-2.48 G Hz Power: 3.7-5V DCAntenna Length: 30mm
Size: 9.5mm*10.5mm*2.5mm Weight: 0.28g
Colour: Blue / Red (Send Randomly)
Features: This DSM2 could support all JR & Spektrum transmitter. It also could support WALKERA DEVO 10 & DEVO 7E with deviation firmware. Support all transmitter which has DSM2 protocol. Binding: There is no bind pin designed, the receiver has an autobind procedure just like with small quad-copters. When switch on, receiver tries to bind with transmitter for about 3s (led is blinking). If receiver find a transmitter (must be also in bind mode) then it records transmitter identifier & works with it. If it cant bind with a transmitter then is retrieves previously bind transmitter identifier & works with it. This way, you save an extra pin & just need to bindonly once. After bind procedure, If reception is ok then led on, if no reception at all led off, if reception bad led is blinking randomly. Note:CH1 to CH5 is servo signal output. If CH1 connect to GND, CH2 will output 6CH PPM signal. Package Included:1 x Tiny DSM2 Receiver


...

Description:170 degrees Wide Angle. High resolution, color restore true. Night vision effect is outstanding. Reversing video is fluent, quality is stable. Specification: Pickup device:MV136 1/4 COLOR CCDSignal System:NTSC/PALoptional Effective pixels:PAL:720*576 NTSC:720*480 Scanning system:2:1interlaced scanning Definition:420TV lines Visual Angle:170optional Vertical synchronization frequency:60 Hz Minimum illumination:1 Lux/F1.2 Video output:1.0vp-p, 75 Ohm coefficient:0.45AGC: Automatic SNR48d B White balance: Automatic Electronic shutter:1/60-1/20, 000s Backlight compensation: Automatic Current consumption:120m Amaximum Power supply:DC12 V Operating temperature: -20C~70C maximum Humidity RH95% Storage temperature: -40C~80C maximum Humidity RH95% Package Included:1 XRear View Camera ...

2.8CM Elephant Mini Funny Doll Furniture Ornaments Model Description:
Material: PVC
Height: 2.8cm
Colour:


...

Only US$8.25, buy best tiny whoop rc quadcopter spare parts action stand sale online store at wholesale price. ...

Tiny whoover EW65 FPV Hovercraft RC Quadcopter Built-in Beecore V2.0 Flight Controller Another fun way to play with brushed Tiny whoop. Lets rock & drift.. You can also enjoy the FPV Experience with the FPV goggles. These nifty, little conversion kits work with your Tiny whoop electronics to transform it into a fully functional, super-fast hovercraft that works on almost any surface. Description: Item Name: Realacc Tiny Whoover EW65 FPV Racer Hovercraft RC Quadcopter Battery:3.8v 250mah Motor:06150716AIO Camera VTX: Output power: 25mw Frequency: 48CHInput voltage: 3.3V 5.5 V Current consumption: 300m A (type) Camera resolution: 700TVLField of view: 120 Video Format: NTSCAntenna: RG178 antenna Frequency: 5.8 G Hz 6 bands 48 channels With Raceband: 5474 5945 MHZ
Size: 13.912.0mm (L*W ) Weight: 3g Flight Controller:CPU: STM32F303CCT6 Six-Axis: MPU6500ESC: All FETs are rated at 10A maximum Work voltage: 3.5V-4.35V / 1S Lipo battery input Firmware Version: BETAFLIGHTF 3.2.0 Firmware Target: Omnibus OSD: Built-in Beta Flight OSD (STM32 controls OSD chip over SPI in DMA mode)
Size: 26mm x 26mm (Fully compatible with the Inductrix quad & Eachine E010/E010S frame & mounting pattern.) Weight: 3.2g Receiver option: Frsky 8CH protocol D8 Mode (SBUS) Flysky 6CH AFHDS 2A protocol (IBUS) Spektrum DSM2/DSMX protocol Compatible:1. Frsky Receiver Support FRSKY X9D/X9D PLUS (D8 mode), and XJT (D8 Mode), DJT DFT DHT Transmitter.2. Flysky Receiver Support Eachine i 6, FS-i 4, FS-i 6, FS-i 6S, FS-i 6X,

...

Description: Xiaomi Tinymu Home Smart APP Connection Multifunctional Anti Bacteria Toilet Seat 3 Grade Adjustable Here comes your waiting Smart Toilet Seat, as smart as smart could be -- it is not only a simple toilet seat but also an electronic bidet for you or your family to wash the anus & genital easily. Multifunctional as it, you can find more surprise usage to keep your life hygienic & health. Features :● Instant Hot Constant Water Temperature Hygienic fresh water, prevent from bacteria breeding More energy-savingthan thermal storage type: After longtime washing, water temperature is still unchanging. Washing adjustment position function, can interact with other product groups of Mijia APP, & identify users with hand ring. There are 8 color sensor night lights, Automatic reminder effect for the toilet cover & your mobile phone Mijia APP if you sit the toilet seat for long time. Also has sterilizing filter function.● Comfortable Feminine Cleaning With one nozzle on the side rim for cleaning the anus & genital areas, helping female to clean their vulva easily & keep healthy even in the menstruation period●3 Grade Adjustable Heatable Seat Easy to set the seat temperature according to different need.●APP Remote Control You can connect the product with Mijia APP to monitor & set the product conveniently.● Hip Wash Back & Forth Press the Hip Wash button again, the nozzle will move back & forth constantly to expand the washing area, improving the cleaning effect● Standard Ext ...

null Description: Xiaomi Tinymu Pressurized Shower Head Sets 110mm Large Shower Panel 3 Shower Mode Stainless Steel Water Hose Faucet Lifting Rod Bathroom Shower Sets Specification: Brand Tinymu [ Xiaomi Cooperation Brand ] Model WHS02 Pressurized Shower Head WRG01 Shower Hose WLT01 Faucet WSJG01 Lifting Rod Material 304 Stainless Steel+ Silicone PVC+ Polyester net 304 Stainless Steel 304 Stainless Steel+ABSPanel Diameterφ110mmxxx Thread G1/2G1/2G1/2 Shower Mode- Massage Modexxx- Rainfall Mode- Spray Mode Water Inlet Threadxx G3/4x Accessoriesxx 2*S-unions, 2* Gasket, 2* Wall Cover Wall base, Slide, Rod Size 250 x 110 x 29mm 1.5m 180 x 143 x 105mm 700 x 111mm Weight 214.5g 243.5g 1023g 321.5g Package

Includes:: :1 x Tinymu Pressurized Shower Head OR1 x Shower Hose OR1 x Faucet OR1 x Lifting Rod

...