1M 60LEDs 5050SMD WS2811 LED strip Product
Features:1) New Brand 2) superb right 5050 SMD LED, high intensity
...

5M 150LEDs 5050SMD WS2811 LED strip Product
Features:1) New Brand 2) superb right 5050 SMD LED, high intensity
...

Feature: Superb right 5050 SMD LED, high intensity & reliability. Flexible ribbon for curving around bends Completely smooth & even light spread, solving the uneven luminous problem Ultra-bright but running at low temperature Low power consumption The best seller product & tested by market----WS2811 Digital Programmable LED Strip. Each 3LED programmable & cuttable, Lower voltage drop, better heat dissipation. Specification: Input voltage :DC12 V Power: 48/5MLED Strip Light Wide: 12mm LED resource: High brightness 5050 RGBQuantity of LED: 240 LEDs Bits/
Colour: 8-bits/color; 24bits for RGB color FPC
Colour: White PCB/ Black PCBLight angle:120-140 Protection rate: Tube waterproof IP65 Cuttable: Every 3LEDs cuttable Application:1) Ideal for decoration of building outlines, landscape illumination, amusement themes, 2) Holiday light sculpture, decorative figure, active signs, displays, shop windows 3) & storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway. Feature: Suits the PAHS certificate, no harmful material Input voltage: DC 12 V Out current: 6A (MAX) Package Included:1 x 5M 5050SMD WS2811 LED Strip

...

Specifications: Input power:: DC 5V~ 24 V Output: data signal Support IC type:WS2811/WS2812B/WS2813/USC1903 Drive pixel quantity:600 pixels Voice control: 70 db Remote control battery: 1.5V AAA *2 (Products do not contain batteries) Remote standby power consumption: 0.08 m W Products working temperature:
- 20 ~ 60 degree centigrade
Features:1. The radio-frequency capacitive touch controller, effective control of distance of 20 m 2. Using LED buttons backlight, easy to use at night 3. The audio port, the 3.5 MM audio access, undisturbed when using music mode, make the lights change rhythm is better 4. The advanced PWM pulse width modulation technology, change effect is exquisite, the fixed link end connection 5. A variety of classic mode, follow the selected Application: Interior decoration: Clubs, bars, corridor, room, KTV, clubs, museums, etc. Outdoor decoration: Plazas, commercial buildings, entertainment clubs, scenic spot light, evening on location, etc. Package Included:1x Music Controller 1x Remote

...

WS2812 5V Colorful Highlight LED Night Light Strip Remote Control Switch Ten Modes Description: Item Name: LED Night Light Strip Item NO.: WS2812
Colour: 7 Colors Operating Voltage:5V-6V (Optional) Operating Current: 200cm-200m A, 50cm-400m A Connecting Method: 3P cable connect to the receiver free channel Ten Modes (Controlled by the remote control):1. All LED lights flashing Marquee 2. All LED lights are green 3. All LED lights are red 4. All LED lights are blue 5. All LED lights are yellow 6. All LED lights are cyan-blue 7. All LED lights are violet 8. All LED lights are white 9. 7 colors alternating flashing 10. Red, green, blue flashing Marquee 11. Shut down, repeated cycles If the receiver doesnt have free channel, it can also be connected to a 5V power supply, then the light strip will automatic switch ten modes & repeated cycles. Package Included:1x WS2812 LED Night Light Strip
...

WS2812 LED 5050 RGB 8x 8 64 LED Matrix Built-in Full Color Driver Light Development Board for Arduino ...

WS2812 LED Module Decoder Built-in Buzzer for Pixhawk / Pixhack / Pixraptor Flight Controller Instuction:LED Modul decoder which decodes the IC control signals for the external LED & controls six of WS2812 LED. Specification:LED Modul can be added by connecting it to the flight controllers I2C port. Because most users use a Ublox GPS & Compass module, an I2C splitter is recommended. If using a Pixhawk flight controller, once connected the LED on the center of the board may no longer light up (recent versions of Ardu Pilot will light up both LEDs). Mounting the LED Module The sound from the buzzer can impact the accelerometersif placed too close to the flight controller which can lead to poor altitude hold performance when the buzzer is activated. The buzzer should ideally be mounted at least 5cm away from the flight controllerand the speaker (i.e. the open hole) should not be pointing directly at the flight controller. External LED of WS2812 Led Strips Solder a 4-pin IC DF13-cable to WS2812 Led Strip. The WS2812 Led Strips need 5V. Never power any amount of WS2812 Led Strip from the flight controller or the flight controllers power supply! One WS2812 Led Strip can pull up to 60m A. That accumulates pretty quickly into significant currents when using many. Package Included:1x LED Module 1x SH1.25 6p to 4p IIC port 2p Buzzer wire ...

Specification: Voltage: DC 5VLED source: WS2812B 5050 Light
Colour: RGBLED quantity: 35pcs Board
Colour: black,

...

Specification: Voltage: DC 5VLED source: WS2812B 5050 Light
Colour: RGBLED quantity: 45pcs Board
Colour: black,

...

Only US$9.99, buy best ws 2812b led pixel ring individul addressabie ring 5050 rgb ws 2812 ic buiit-in led moduie with usb/dc wire & sp 110e controller sale online store at wholesale price. ...