Specifications: Input voltage: 3V-9V (supports 1-2 lithium batteries) Continuous working current: 7 A Instantaneous current: 9A (less than 10 seconds)BEC output: 1A / 5V (linear mode) Dimensions (length x width x thickness): 22x 12x 5 mm Weight: 5 g
Features:1. Adopt high-speed, small-sized MCU with powerful functions.2. With low voltage protection; over-temperature protection; throttle signal loss protection; motor starting protection; power-on self-test & so on.3, soft start, 4 seconds super soft start function for helicopter. When starting the helicopter, there is no obvious impact & tail flick.4. It has good starting performance, good throttle linearity & fast throttle response.5. Very good low speed performance.6. The maximum supported speed is: 240, 000 revolutions (2 magnetic poles), 80, 000 revolutions (6 magnetic poles) & 40, 000 revolutions (12 magnetic poles).7. MCU & BEC use different voltage regulators, which are independent of each other, which improves anti-interference ability.8. Built-in linear BEC or switch mode BEC.9. Multiple parameters of the governor can be set through the programming card or remote control.10. The programming card adopts LCD display, which is convenient & intuitive.11. The low-voltage protection threshold & starting power can be quantified & accurately set through the programming card.12. The throttle stroke can be set to be compatible with different receivers.13. 3 throttle curves are available. Motor reverse can be set.14. 7A, 12A