YB27T Car Clock Electronic Watches Luminous Car LED Clock
Features: The electronic clock uses one-button operation Default can be displayed: Hours, minutes, seconds, Date, time timer (Can be changed according to customer needs: Only when every minute, there is no timer function) Display 24-hour display format uses Power & memory function Uses Wide supply voltage:DC4.5-30V, & with reverse polarity protection Instructions: Power-on: Press the positive negative direction The CR1220 button cell Insert the battery holder inside, as shown below: Note: In case if there is no battery or batteries installed upside in red & black lines when there is no power, you will lose the set time In the case of equipment with battery, when the power supply is not connected, the clock will keep walking, do not stop Press Red Positive, Black bear Connection on the power supply will be connected to the display at 0:00, Key to switch the order of: Division mode
- second mode
- Date mode
- Timer mode Second mode: In time mode, press the button will display the seconds, the display format: XXNo button is pressed After about 30 seconds, the time will automatically jump back, sub mode Press again to jump to the next mode Date Mode: In time mode, double-click the button will display the date, the date format: Month Day At about 30 seconds will automatically jump back, sub-mode Press again to jump to the next mode Timer Mode: In time mode, press three buttons will display timing mode, the display format: 00. 00 In the absence of sta