The Surftech Takayama Slater Tuflite Longboard
- When Stephen Slater first began riding for Donald, they collaborated on a new,
...

Surftech Takayama Kai Sallas Tuflite Longboard -The outline of this round tail board was designed very similar to the DT-3. The round tail allows this board to make fast snappy turns while holding in on steep sections. The Kai Sallas gives way to smooth turning ability, as with most of Donald's boards. Dimensions: 9'1 x 22 3/8 x 2 3/4 Nose: 17 3/4" Tail: 14" Fins: Center: Tak 7" Side: FCS GX
Colour: White/ Black pin line (L1700)
...

The Surftech Takayama INP (in the pink) Tuflite Longboard is the modern version of the NR-2. It has a 2+1 fin set up, a 60/40 rail & a harder edge towards the tail. These features allow the boards turning & noseriding capabilities to really shine. Dimensions: 9'3 x 22 3/8 x 2 7/8 Nose: 19 7/8" Tail: 14 1/4" Fins: Center: Tak 8.5" Side: FCS GX GF
Colour: White/ Black & white nose checkers (L1721)
...

The Surftech Takayama INP (in the pink) Tuflite Longboard is the modern version of the NR-2. It has a 2+1 fin set up, a 60/40 rail & a harder edge towards the tail. These features allow the boards turning & noseriding capabilities to really shine. Dimensions: 9'3 x 22 3/8 x 2 7/8 Nose: 19 7/8" Tail: 14 1/4" Fins: Center: Tak 8.5" Side: FCS GX GF
Colour: Yellow/ Blue/ Pink (L0366)
...

The Surftech Takayama INP (in the pink) Tuflite Longboard is the modern version of the NR-2. It has a 2+1 fin set up, a 60/40 rail & a harder edge towards the tail. These features allow the boards turning & noseriding capabilities to really shine. Dimensions: 9'6 x 23 3/4 x 3 1/4 Nose: 20 3/8" Tail: 14 1/2" Fins: Center: Tak 9" Side: FCS GX
Colour: White/ Black & white nose checkers (L1729)
...

The Surftech Takayama 9'8 Double Ender Tuflite Surfboard
- Donald pulled this design from his repertoire in the early 50's & 60's.
...

This design has been my personal favorite everyday surfboard for the past three & a half years. Bottom shape is a double concave between your feet, set within a light single which runs throughout the bottom. Dimensions: 6'2 x 21 1/4 x 2 7/16 Nose: 16 1/2 Tail: 16 1/2 Fins: FCSCenter: M3 Side: MRTX
Colour: Green/ Blue Deck Fade
...

The Surftech Wayne Lynch Pro Tuflite was designed primarily for quality surf in the 5' to 10' waves range. These designs are what Wayne shaped for Indonesia, Fiji, Hawaii, Tahiti & the more powerful reefs & beaches in Australia, USA & Europe. In these types of waves & conditions Wayne has always preferred a very subtle blending of slight double concave into double concave vee right at the tail. Volume is forward in balance for drive & momentum through turns & when tube riding, the rails are soft but low so that the font half of the board still remains positive facilitating sections & barrels. Dimensions: 6'10 x 18 1/2 x 2 1/2 Nose: 10 1/2 Tail: 12 5/8 Fins: FCS M7
Colour: Yellow/ Blue (L1461)
...

The Surftech Wayne Lynch 6'3 Freeform Tuflite is wider, more volume with slightly softer plan-shape curves: This creates great paddling qualities, the ability to run across flat sections, enhancing the board's drive out of your turns & down the lien speed for tube riding momentum. Dimensions: 6'3 x 19 1/4 x 2 1/2 Nose: 11 1/2 Tail: 14 1/2 Fins: FCS M5

Colour: Blue (L0781)

...

The Surftech Wayne Lynch 6'3 Freeform Tuflite is wider, more volume with slightly softer plan-shape curves: This creates great paddling qualities, the ability to run across flat sections, enhancing the board's drive out of your turns & down the lien speed for tube riding momentum. Dimensions: 6'3 x 19 1/4 x 2 1/2 Nose: 11 1/2 Tail: 14 1/2 Fins: FCS M5

Colour: Yellow/ Orange fade/red rail/ white pin line (L1448)

...