More From Contributor

£81.42
Description: This is a FLYSKY GT3C RCtransmitterstock hardware with customized PSX0.6.1 firmware. It could bind with FLYSKY 3CH, 6CH & 8CH receivers. Programmed with customized PSX0.6.1 firmware Steering & throttlepotentiometerwas calibrated Batteryvoltage was calibrated Test model M00 was set to 4CH, CH3.TRIM control CH3CH3 Button controls CH4PSX0.6.1 Firmware Information: The 0.6.1 Firmware for the Flysky GT3B & Flysky GT3C is an open source firmware written by psx. This firmware has been through numerous revisions. The original intent of the firmware was to fix the bugs the stock firmware has, an example of a bug is the exponential function doesnt function like the traditional expo setting on other transmitters. Over time the firmware was completely rewritten to add functionality well beyond what is traditionally offered in any budget radio. Some of these additional features are:1.2-8 Channels 2.60 Model Memory 3. Key Mapping (Assign ANY key to operate ANY function)4. Timers 5. Adjustable Inactivity & Low Voltage Alarms 6. Dual ESC Mixing for MOA Crawlers, Tanks, Boats, Robots....7.4WS Mixing for RC vehicles that have front & rear axle steering 8. Channel Turn & Return Speed Weight:303g
Colour:random send RC Parts Accs: Transmitters Specifications: Channels:3 Channels Model type:car/boat RF range:2.40-2.48 G Hz Band
Width:500 K Hz Band:160RF power:less than 20DB2.4G system:AFHDSCode type:GFSKSensitivity:1024 Low voltage warning:yes (less than 3.5V)DSC port: yes (USB;output:PPM)ST range:90TH range:45

...
Available
£78.99
Description: Item Brand: Dasmikro Item Name: Das 87 das 87A03 kit
Material: Metal, rubber (only the tires) & plastic (only
...
Available
£42.43
Description: Item Brand: Das Mikro Item Number:DS87E01 Item Name: Two-Axle Truck Chassis Quick DIY Kit Motor:6mm planetary gear motor Drive Way:2wd, rear wheel drive
Material: Plastic & brass
Colour: As the picture shown Recommendating Parts: (they are not included in the package)1. Remote controller.flysky FS-GT2, FS-GT2B, FS-GT2E, FS-GT2G, FS-GT2F, FS-GT3B, FS-GT3C, FS-i T4S, FS-i 4X, FS-i 6, FS-i 6X.FS-CT6B, FS-T6, FS-TH9X, FS-TH9A, FS-TM10, FS-i 8, FS-i 102. Receiver, product id is 1476197 and 1476051 Packageincluded:1 X Das 87 DS87E01 Kit (the rc car is not included)

...
Available
£87.41
Description: Item Brand: Das Mikro Item Number:DS87E06 Item Name:4WD Unimog Truck Metal Chassis DIY Kit Motor:6mm hollow cup motor Independent gear box Drive Way:4WD
Material: Plastic, rubber & metal
Colour: As the picture shown For the online manual, please click here to download it Recommendating Parts: (they are not included in the package)1. Remote controller.flysky FS-GT2, FS-GT2B, FS-GT2E, FS-GT2G, FS-GT2F, FS-GT3B, FS-GT3C, FS-i T4S, FS-i 4X, FS-i 6, FS-i 6X.FS-CT6B, FS-T6, FS-TH9X, FS-TH9A, FS-TM10, FS-i 8, FS-i 102. Receiver, product id is 1476197and 1476051 Packageincluded:1 X Das 87 DS87E06 4WD Kit (the rc cars are not included)

...
Available
£25.99
null Description: This RC receiver unit is FLYSKY AFHDS compatible. It offers full 7-channel support in ultra-light weight & mini size. It is suitable for 1/87 RC conversion.
Features:1. FLYSKY 2.4 G Hz AFHDS compatible 2. 7 channel support 3. Integrated two standalone Bi-directional ESC (max 1A currency)4. Integrated one Single-directional ESC (max 3A currency)4. Mini size (16.0 x 10.0 x 2.5mm)5. Operating Voltage 3.0V – 4.2V6. Product Weight: 0.5g Output Usage: Servo signal output:CH1: (Steering)CH2: (Throttle)CH3: (Spare, normally use to control the sound unit or light unit)CH4: (Spare, normally use to control the sound unit or light unit)CH7: (Spare) Bi-directional ESC output:OUT1/OUT2: connect a brushed motor, controlled by CH2 signal from transmitter OUT3/OUT4: connect a brushed motor, controlled by CH6 signal from transmitter Single-directional ESC or LED output:OUT5: connect a brushed motor or LEDs, controlled by CH5 signal from transmitter Compatible Transmitters:FLYSKY transmitter like GT2/GT2B/GT3/GT3B/GT3C/GT3C with PSX.0.6.1 8CHFLYSKY Stick-type transmitter like CT6A/CT6B/T6/TH9X/I4/I4X/I6/I6X/I10 Jumper Stick-type transmitter like T8SG/T12/T12PRO/T16/T16PROAny OPENTX & Deviation Stick-type transmitter installed with A7015 RF module Package Included:1 x Receiver Bind: Power on the receiver, LED will flash slowly. Wait 15 seconds & the LED will flash quickly, this means the receiver is in paring mode. Now you could operate your transmitter to start the bind operation. Once t
...
Available
£13.99
Description:  Item Brand: Das Mikro  Item Name: Nano receiver 
Material: Metal 
Colour: As the picture shown 

...
Available
£29.99
null Description: This RC receiver unit is Fr Sky D8 compatible. It offers full 7-channel support in ultra-light weight & mini size. It is suitable for 1/87 RC conversion.
Features:1. Fr Sky 2.4 G Hz D8 compatible 2. 7 channel support 3. Integrated two standalone Bi-directional ESC (maximum 1A currency)4. Integrated one Single-directional ESC (maximum 3A currency)4. Mini size (16.0 x 10.0 x 2.5mm)5. Operating Voltage 3.0V – 4.2V6. Product Weight: 0.5g Output Usage: Servo signal output:CH1: (Spare, normally use to control the sound unit or light unit)CH2: (Throttle)CH3: (Spare, normally use to control the sound unit or light unit)CH6: (Spare)CH7: (Spare) Bi-directional ESC output:OUT1/OUT2: connect a brushed motor, tank mode mixed controlled by CH2/CH4 signal from transmitter OUT3/OUT4: connect a brushed motor, tank mode mixed controlled by CH2/CH4 signal from transmitter CH2 is throttle & CH4 is steering Single-directional ESC or LED output:OUT5: connect a brushed motor or LEDs, controlled by CH5 signal from transmitter Compatible Transmitters: Fr Sky Stick-type transmitter Jumper Stick-type transmitter like T8SG/T12/T12PRO/T16/T16PROAny OPENTX & Deviation Stick-type transmitter installed with CC2500 RF module Package Included:1 x Receiver Bind: Power on the receiver, LED will flash slowly. Wait 15 seconds & the LED will flash quickly, this means the receiver is in paring mode. Now you could operate your transmitter to start the bind operation. Once the bind is successful, the LED on recei
...
Available
£29.99
null Description: This RC receiver unit is Fr Sky D8 compatible. It offers full 7-channel support in ultra-light weight & mini size. It is suitable for 1/87 RC conversion.
Features:1. Fr Sky 2.4 G Hz D8 compatible 2. 7 channel support 3. Integrated two standalone Bi-directional ESC (max 1A currency)4. Integrated one Single-directional ESC (max 3A currency)4. Mini size (16.0 x 10.0 x 2.5mm)5. Operating Voltage 3.0V – 4.2V6. Product Weight: 0.5g Output Usage: Servo signal output:CH1: (Steering)CH2: (Throttle)CH3: (Spare, normally use to control the sound unit or light unit)CH4: (Spare, normally use to control the sound unit or light unit)CH7: (Spare) Bi-directional ESC output:OUT1/OUT2: connect a brushed motor, controlled by CH2 signal from transmitter OUT3/OUT4: connect a brushed motor, controlled by CH6 signal from transmitter Single-directional ESC or LED output:OUT5: connect a brushed motor or LEDs, controlled by CH5 signal from transmitter Compatible Transmitters: Fr Sky Stick-type transmitter Jumper Stick-type transmitter like T8SG/T12/T12PRO/T16/T16PROAny OPENTX & Deviation Stick-type transmitter installed with CC2500 RF module Package Included:1 x Receiver Bind: Power on the receiver, LED will flash slowly. Wait 15 seconds & the LED will flash quickly, this means the receiver is in paring mode. Now you could operate your transmitter to start the bind operation. Once the bind is successful, the LED on receiver will be on. Power off both your transmitter & receiver then power them on
...
Available
£15.27
Description: Das 87 DSM2 7CH PPM Transmitter is an AR6100 type receiver reprogrammed to be a DSM2 compatible short range transmitter. It is intended to be used as a 7ch TX module with an older transmitter or any DIY RC project with PPM signal out. The TX accept idle high & low (normal & inverted PPM).
Features: Das 87 DSM2 7CH PPM Transmitter is a DSM2-compatible transmitter module intended to convert traditional joystick transmitters to 2.4 G Hz. It is a DIY solution requiring some understanding of electronics & soldering. It may require a voltage regulator & Zener diode to control voltages from the host transmitter. The host transmitter can have 2 to 12 channels. The first 7 PPM pulses will be transmitted. To use as a module you will need a 3.3 or 5v regulator if it is to be powered from 2S or 3S Lipo. Some PPM signals exceed 3.6v so you may need a 3.3v Zener diode & 1000 ohm resistor to limit the voltage. Specification The TX moudle can be powered by 3.2-10v The PPM input to the signal Pin 7 must be 2.1v to 3.6v (max) when high The PPM input must be below 0.8v when low Pin 7 floats needs active (strong) highs & lows The PPM signal can idle high or low User manual, please click here Bind:1. Switch the Rx on in bind mode.2. Put bind plug on Tx 1 Pin 1.3. Switch Tx 1 on.4. Wait for Tx & Rx led to stop flashing. Package Included:1 x DSM2 7CH PPM Transmitter 1X Bind Cable
...
Available
£19.99
null Description: Item Name: Das 87 Flysky AFHDS2A 7CH Nano Receiver
Material: Metal
Colour: As the picture

...
Available

DasMikro Das87 FLYSKY Nano 7CH Receiver Integrated 2 Mixed
Bi-directional ESC For Tank Type

nullDescription:This RC receiver unit is FLYSKY AFHDS compatible. It offers full 7-channel support in ultra-light weight and mini size. It is suitable for 1/87 RC conversion.Features:1. FLYSKY 2.4GHz AFHDS compatible2. 7 channel support3. Integrated two standalone Bi-directional ESC (maximum 1A currency)4. Integrated one Single-directional ESC (maximum 3A currency)4. Mini size (16.0 x 10.0 x 2.5mm)5. Operating Voltage 3.0V – 4.2V6. Product Weight: 0.5gOutput Usage:Servo signal output:CH1: (Spare, normally use to control the sound unit or light unit)CH2: (Throttle)CH3: (Spare, normally use to control the sound unit or light unit)CH6: (Spare)CH7: (Spare)Bi-directional ESC output:OUT1/OUT2: connect a brushed motor, tank mode mixed controlled by CH2/CH4 signal from transmitterOUT3/OUT4:
connect a brushed motor, tank mode mixed controlled by CH2/CH4 signal from transmitterCH2 is throttle and CH4 is steeringSingle-directional ESC or LED output:OUT5: connect a brushed motor or LEDs, controlled by CH5 signal from transmitterCompatible Transmitters:FLYSKY transmitter like GT2/GT2B/GT3/GT3B/GT3C/GT3C with PSX.0.6.1 8CHFLYSKY Stick-type transmitter like CT6A/CT6B/T6/TH9X/I4/I4X/I6/I6X/I10Jumper Stick-type transmitter like T8SG/T12/T12PRO/T16/T16PROAny OPENTX and Deviation Stick-type transmitter installed with A7015 RF modulePackage Included:1 x ReceiverBind:Power on the receiver, LED will flash slowly. Wait 15 seconds and the LED will flash quickly, this means the receiver is in paring
Availability: In Stock
£28.99

Product Description

null Description: This RC receiver unit is FLYSKY AFHDS compatible. It offers full 7-channel support in ultra-light weight & mini size. It is suitable for 1/87 RC conversion.
Features:1. FLYSKY 2.4 G Hz AFHDS compatible 2. 7 channel support 3. Integrated two standalone Bi-directional ESC (maximum 1A currency)4. Integrated one Single-directional ESC (maximum 3A currency)4. Mini size (16.0 x 10.0 x 2.5mm)5. Operating Voltage 3.0V – 4.2V6. Product Weight: 0.5g Output Usage: Servo signal output:CH1: (Spare, normally use to control the sound unit or light unit)CH2: (Throttle)CH3: (Spare, normally use to control the sound unit or light unit)CH6: (Spare)CH7: (Spare) Bi-directional ESC output:OUT1/OUT2: connect a brushed motor, tank mode mixed controlled by CH2/CH4 signal from transmitter OUT3/OUT4: connect a brushed motor, tank mode mixed controlled by CH2/CH4 signal from transmitter CH2 is throttle & CH4 is steering Single-directional ESC or LED output:OUT5: connect a brushed motor or LEDs, controlled by CH5 signal from transmitter Compatible Transmitters:FLYSKY transmitter like GT2/GT2B/GT3/GT3B/GT3C/GT3C with PSX.0.6.1 8CHFLYSKY Stick-type transmitter like CT6A/CT6B/T6/TH9X/I4/I4X/I6/I6X/I10 Jumper Stick-type transmitter like T8SG/T12/T12PRO/T16/T16PROAny OPENTX & Deviation Stick-type transmitter installed with A7015 RF module Package Included:1 x Receiver Bind: Power on the receiver, LED will flash slowly. Wait 15 seconds & the LED will flash quickly, this means the receiver is in paring

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LED - Light Emitting Diode - a small light source
Motor - A evice that converts electricity into motion
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Size - is the measurement of how big an object is in space.
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
Voltage - A measurement of volts.

Supplier Information

Banggood US
Banggood is your one-stop online shop for a wide range of products at unbeatable prices. From electronics and gadgets to fashion, home goods, and outdoor gear, we've got something for everyone. With thousands of products from top brands and emerging designers, you'll find the latest trends and must-have items right at your fingertips. Plus, our user-friendly website and mobile app make shopping a breeze, with secure payment options and fast, reliable shipping worldwide. Whether you're looking for the hottest tech gadgets, stylish clothing, or practical everyday essentials, Banggood has you covered. Shop now and discover why millions of customers trust us for their shopping needs!
Page Updated: 2025-01-23 13:29:24

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu