Description: This is a RC signal mixer designed to control 2 standalone bi-directional ESCs (center stick = zero throttle). It mixes Rudder & Throttle inputs to produce two Throttle outputs. Throttle outputs limited to between zero & full forward/reverse throttle. Applying rudder at low throttle will NOT cause either output to cross over to the opposite direction. Mix Ratio could be adjusted from 33% to 100%. Operation Voltage: The PCB works from 4.2V to 9.6V. It take the power from ESC BEC & provide it to receiver. Package Included:1 x RC signal mixer 2 x JST extend cable (male to male)2 x JST extend cable (male to female) ...

Das Mikro Robitronic Compatible Lap Counter System USB (Universal Serial Bus) Set Description: This is an Robitronic Compatible Lap Counter System. It is a reasonably priced lap-counting-system for RC-cars of all scales. It has been especially developed & is applicable for use in mini-RC-cars of 1:18, 1:20 & 1:27 (Mini-Z) scale. Features Lap-counting-system for RC-models of all scales Suitable for in- & outdoor tracks Any number of vehicles can be counted at the same time Personal transponder with unique ID number Extremely small & lightweight transponder (12x 16x 5mm @ 3g) Direct USB (Universal Serial Bus) port connection (Integrated USB (Universal Serial Bus) to Serial Converter) Software for all common Windows operating systems Package Included:4 x receiver modules 3 x personal transponders 1 x PC interface box 1 x long data cable 3 x shot data cable 1 x USB (Universal Serial Bus) disk (RCM & Zround software, Driver)1 x power adapter ...

Description: Item Brand: Das Mikro Item Name: Short Antenna Surface Receiver
Material: Plastic & metal
Colour:

...

Description: This RC receiver unit is Sanwa high speed FHSS-4 & FHSS-3 compatible.
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable
...

Description: This RC receiver unit is Sanwahigh speed FHSS-4 & FHSS-3 compatible.
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable
...

Sound Unit for RC Tractors Programming Cable for RC Tractor Sound Unit Description: Sound Unit for RC Tractors This sound unit is developed for electric powered RC tractors. It could be used to 1/32, 1/24 & 1/18 RC tractors, especially suitable for 1:32 Siku Lanz Eil-Bulldog RC Tractor 2.4G conversion. Technical Data: Dimension: 11 x 23, 5 x 3, 2mm (min.11x 16x 3, 2mm) Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: 1ms to 2ms Sound quality: up to 22 k Hz Programming Cable for RC Tractor Sound Unit This programming cable is developed specially for RC Tractor Sound Unit. With this programming cable you could switch 4 different tractor sounds provided, & you can reveal so much new function on Sound Unit, not only program new sounds, but you can also use channel 3 to choose from 16 different sound or & light control functions. For more information, please refer to:http://www.banggood.com/ Sound-Unit-For-132-124-118-RC-Tractors-132-Siku-Lanz-Eil-Bulldog-RC-Tractor-2_4G-Conversion-p-1034926.htmlhttp://www.banggood.com/ Programming-Cable-For-RC-Tractor-Sound-Unit-Programming-New-Sounds-Choosing-Different-Sounds Light-p-1034925.html For TBS Micro Sound Unit manual, Programming Software, Programming Software Manual, USB Driver, Sound library, Please click HERE. Package Included:1 X Sound Unit 1 X Programming Cable ...

Description: Thissound unit is developed for all kindsof RC controlled models, including trucks, crawlers, tanks, airplanes...

...

Transponder For Robitronic Lap Counter System RC Car Parts Description: With the extremly small & lightweight transponder a modelcar owns a worldwide unique ID number. If a car equipped with it crosses the start/finish line, the transponder signal with the ID number will be recognized & processed by the receiver-module in the loop bridge. The lap-counting-system can process any number of transponders at the same time, not depending on the number of receiver-modules used on the loop-bridge. The number of receiver-modules much more depends on the width of the track under the bridge. The provided software, when installed on a PC, can be used for practice runs right away. Dimensions: 12 x 16 x 5mm Weight: 3g Voltage:4.2-6 V Amperage: 50m A Robitronic Lap Counter System
Features: Transponder
Features: Package Included:1 XTransponder

...

Data Frog 2.4G Wireless Gamepad for Android 2.3 Smartphone TV Box for PC Windows 7 8 98 2000 Game Joystick ...

DATA FROG 4-in-1 Wired Arcade Joystick Gamepad Support Turbo Mode Fighting Stick Game Controller USB (Universal Serial Bus) Wired Rocker Support HD Ouput for PS3/ Switch/PC/ Android Games Console ...