Das Mikro Programmable Sound Unit for Europe & US Trailer Truck Description: This sound unit is developed for electric powered RC trailer or truck. It could be used to 1:32, 1/24 & 1/18 RC vehicles, especially suitable for 1:24 ITALERI & Revell 1:24 series model RC conversion. rovide more than 30 different sound files for many Europe & US trailer & truck engines.

Features:- Sound quality 22 K Hz- Internal 1W amplifier at 8 Ohm speakers- Receiver signals are used for speed information, this allowsbrushlessor DC Motorusage- Fully assembled in SMD technology (no heavy, vibration sensitive components)- All wires included- Very littledimensionandweight Technical Data: Brand: Dasmikro Item: Programmable Sound Unit Dimension: 11 x 23, 5 x 3, 2mm (min.11x 16x 3, 2mm) Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: 1ms to 2ms Sound quality: up to 22 k Hz Sound selection play by a 3 position switch (toggle switch) This control mode need a toggle switch with neutral position (recommended), or a common proportional channel. Selecting a sound or function: The desired sound (e.g sound 3 or function) is selected by pushing the switch/stick 3 times from its neutral position to high position (1.8ms). The selected sound/fuction is triggered/played by pushing the switch/stick to low position (1.2ms). The last selected sound/func

...

Programmable Sound Unit for Orlandoo F150 OH35P01 KIT Micro RC Crawlers Description: This soundunit is developed specially for electric powered RC. It could be used to 1:35, 1/24 & 1/18 RC crawlers. Especially suitable for Orlandoo F150 OH35P01 KIT Assemble Climbing RC Car Parts Version
Features: Plug & Play Soundquality 22 K Hz Internal 1W amplifier at 8 Ohm speakers All connections done by plugs, no solderwork necessary Receiver signals are used for speed information, this allows brushless or DC Motor usage Fully assembeled in SMD technology (no heavy, vibration sensitive components) All wires included Very little

Dimensions & weight Technical Datas: Dimensions: 11 x 23, 5 x 3, 2mm (min.11x 16x 3, 2mm) Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: Positive Impuls 0, 8ms bis 2, 0ms Soundquality: up to 22, 05 k Hz Teaching the sound unit for throttle idle/accelerate point:1. Power on transmitter & receiver. LED blinks fast
- normal mode. Bring throttle stick to idle. Motor must not move.2. Bridge study switch for about 0.5 seconds until beep
- LED cont. on. At this moment the idle position of the throttle stick is stored.3. Move throttle stick to your desired acceleration point (throttle stick position where idle dead band stops & engine running sound starts) & wait for a beep. Now the dead (neutral) band of th




...

Programming Cable For RC Tractor Sound Unit Programming New Sounds Choosing Different Sounds/ Light Description: This programming cable is developed specially for RC Tractor Sound Unit. With this programming cable you could switch 4 different tractor sounds provided, & you can reveal so much new function on Sound Unit, not only program new sounds, but you can also use channel 3 to choose from 16 different sound or & light control functions. For TBS Micro Sound Unit manual, Programming Software, Programming Software Manual, USB Driver, Sound library, Please click HERE. Package Included:1 X Programming Cable ...

Programming Cable for TBS Micro Sound Unit Description: This programming cable is developed specially for TBSMicro Sound Unit. Pleae Click 1, 2 for:TBS Micro Sound Unit manual Programming Software Programming Software Manual USB Driver Sound library Package Included: 1 X Programming Cable ...

Description: This is a RC signal mixer designed to control 2 standalone bi-directional ESCs (center stick = zero throttle). It mixes Rudder & Throttle inputs to produce two Throttle outputs. Throttle outputs limited to between zero & full forward/reverse throttle. Applying rudder at low throttle will NOT cause either output to cross over to the opposite direction. Mix Ratio could be adjusted from 33% to 100%. Operation Voltage: The PCB works from 4.2V to 9.6V. It take the power from ESC BEC & provide it to receiver. Package Included:1 x RC signal mixer 2 x JST extend cable (male to male)2 x JST extend cable (male to female) ...

Description: Item Brand: Das Mikro Item Name: Short Antenna Surface Receiver
Material: Plastic & metal
Colour:

...

Description: This RC receiver unit is Sanwa high speed FHSS-4 & FHSS-3 compatible.
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable
...

Description: This RC receiver unit is Sanwahigh speed FHSS-4 & FHSS-3 compatible.
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable
...

Description: This RC receiver unit is Sanwa FHSS-4 & FHSS-3 compatible. It offers full 4-channel support in ultra-light weight & micro size & it is integrated a YOKOMO GRYO system. Item Brand: Das Mikro Item Name: Micro 4 Channel Gyro System Receiver
Material: Plastic & metal
Colour: As the picture shown Product
Size: About 30mm*20mm Product Weight: About 5g For the instruction, please click here
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable Via Transmitter 2. High performance CPU enhance precision control feeling 3. 4 channel support 4. YOKOMO GYRO system integrated 5. Micro size (36x 15x 7mm)6. Added failsafe function 7. Operating Voltage 4.2V
- 7.4V:8. Weight: 3g Compatible Transmitters: Sanwa M17 Sanwa M12 S Sanwa M12 Sanwa MT44 Sanwa MT4 S Sanwa M11 X Sanwa MT-SPackage Included:1 x Receiver 4 x 1.5mm 3P JST plug with high quality silicon cable




...

Sound Unit for RC Tractors Programming Cable for RC Tractor Sound Unit Description: Sound Unit for RC Tractors This sound unit is developed for electric powered RC tractors. It could be used to 1/32, 1/24 & 1/18 RC tractors, especially suitable for 1:32 Siku Lanz Eil-Bulldog RC Tractor 2.4G conversion. Technical Data: Dimension: 11 x 23, 5 x 3, 2mm (min.11x 16x 3, 2mm) Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: 1ms to 2ms Sound quality: up to 22 k Hz Programming Cable for RC Tractor Sound Unit This programming cable is developed specially for RC Tractor Sound Unit. With this programming cable you could switch 4 different tractor sounds provided, & you can reveal so much new function on Sound Unit, not only program new sounds, but you can also use channel 3 to choose from 16 different sound or & light control functions. For more information, please refer to:http://www.banggood.com/ Sound-Unit-For-132-124-118-RC-Tractors-132-Siku-Lanz-Eil-Bulldog-RC-Tractor-2_4G-Conversion-p-1034926.htmlhttp://www.banggood.com/ Programming-Cable-For-RC-Tractor-Sound-Unit-Programming-New-Sounds-Choosing-Different-Sounds Light-p-1034925.html For TBS Micro Sound Unit manual, Programming Software, Programming Software Manual, USB Driver, Sound library, Please click HERE. Package Included:1 X Sound Unit 1 X Programming Cable ...