Description: This sound unit is developed for advanced users. It is ideal sound & light control system for 1:87 micro model RC conversion. It could be used to 1/87, 1/72, 1/48, 1/35 & 1/32 RC model. This sound unit is 100% compatible TBS Micro sound unit. This module does not have preload sound, you have to work with a programming cable & software to upload sound & make settings before use it.
Features: Soundquality 22 K Hz Internal 1W amplifier at 8 Ohm speakers Receiver signals are used for speed information Fully assembled in SMD technology (no heavy, vibration sensitive components) Very littledimensionsandweight Technical Datas: Dimension: 11x 16x 3, 2mm (Version A) 11 x 23, 5 x 3, 2mm (Version B) Voltage: 3.7V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: Positive Impuls 1ms bis 2, 0ms Sound quality: up to 22, 05 k Hz Manual, software & sound are available, please click here. Optional (A): Without JST plug Optional (B): With JST plug Package Included:1 x Micro Sound Unit
...

Description: Item Brand: Das Mikro Item Name:USB Programming Cable
Material:ABS & electronic components
Colour:

...

Das Mikro Programmable Sound Unit for Europe & US Trailer Truck Description: This sound unit is developed for electric powered RC trailer or truck. It could be used to 1:32, 1/24 & 1/18 RC vehicles, especially suitable for 1:24 ITALERI & Revell 1:24 series model RC conversion. rovide more than 30 different sound files for many Europe & US trailer & truck engines.

Features:- Sound quality 22 K Hz- Internal 1W amplifier at 8 Ohm speakers- Receiver signals are used for speed information, this allowsbrushlessor DC Motorusage- Fully assembled in SMD technology (no heavy, vibration sensitive components)- All wires included- Very littledimensionandweight Technical Data: Brand: Dasmikro Item: Programmable Sound Unit Dimension: 11 x 23, 5 x 3, 2mm (min.11x 16x 3, 2mm) Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: 1ms to 2ms Sound quality: up to 22 k Hz Sound selection play by a 3 position switch (toggle switch) This control mode need a toggle switch with neutral position (recommended), or a common proportional channel. Selecting a sound or function: The desired sound (e.g sound 3 or function) is selected by pushing the switch/stick 3 times from its neutral position to high position (1.8ms). The selected sound/fuction is triggered/played by pushing the switch/stick to low position (1.2ms). The last selected sound/func

...

Programmable Sound Unit for Orlandoo F150 OH35P01 KIT Micro RC Crawlers Description: This soundunit is developed specially for electric powered RC. It could be used to 1:35, 1/24 & 1/18 RC crawlers. Especially suitable for Orlandoo F150 OH35P01 KIT Assemble Climbing RC Car Parts Version
Features: Plug & Play Soundquality 22 K Hz Internal 1W amplifier at 8 Ohm speakers All connections done by plugs, no solderwork necessary Receiver signals are used for speed information, this allows brushless or DC Motor usage Fully assembeled in SMD technology (no heavy, vibration sensitive components) All wires included Very little

Dimensions & weight Technical Datas: Dimensions: 11 x 23, 5 x 3, 2mm (min.11x 16x 3, 2mm) Voltage: 3V to 5V (supplied by the receiver) Note the maximum supply voltage of 5V! Current: app. 10m A without sound, app. 250m A at max. volume Speaker: 8-32 Ohm Output power: 1W at 8-Ohm at 5V; 0, 6W at 8-Ohm at 3 V Proportional inputs: Positive Impuls 0, 8ms bis 2, 0ms Soundquality: up to 22, 05 k Hz Teaching the sound unit for throttle idle/accelerate point:1. Power on transmitter & receiver. LED blinks fast
- normal mode. Bring throttle stick to idle. Motor must not move.2. Bridge study switch for about 0.5 seconds until beep
- LED cont. on. At this moment the idle position of the throttle stick is stored.3. Move throttle stick to your desired acceleration point (throttle stick position where idle dead band stops & engine running sound starts) & wait for a beep. Now the dead (neutral) band of th




...

Programming Cable For RC Tractor Sound Unit Programming New Sounds Choosing Different Sounds/ Light Description: This programming cable is developed specially for RC Tractor Sound Unit. With this programming cable you could switch 4 different tractor sounds provided, & you can reveal so much new function on Sound Unit, not only program new sounds, but you can also use channel 3 to choose from 16 different sound or & light control functions. For TBS Micro Sound Unit manual, Programming Software, Programming Software Manual, USB Driver, Sound library, Please click HERE. Package Included:1 X Programming Cable ...

Description: This is a RC signal mixer designed to control 2 standalone bi-directional ESCs (center stick = zero throttle). It mixes Rudder & Throttle inputs to produce two Throttle outputs. Throttle outputs limited to between zero & full forward/reverse throttle. Applying rudder at low throttle will NOT cause either output to cross over to the opposite direction. Mix Ratio could be adjusted from 33% to 100%. Operation Voltage: The PCB works from 4.2V to 9.6V. It take the power from ESC BEC & provide it to receiver. Package Included:1 x RC signal mixer 2 x JST extend cable (male to male)2 x JST extend cable (male to female) ...

Das Mikro Robitronic Compatible Lap Counter System USB (Universal Serial Bus) Set Description: This is an Robitronic Compatible Lap Counter System. It is a reasonably priced lap-counting-system for RC-cars of all scales. It has been especially developed & is applicable for use in mini-RC-cars of 1:18, 1:20 & 1:27 (Mini-Z) scale. Features Lap-counting-system for RC-models of all scales Suitable for in- & outdoor tracks Any number of vehicles can be counted at the same time Personal transponder with unique ID number Extremely small & lightweight transponder (12x 16x 5mm @ 3g) Direct USB (Universal Serial Bus) port connection (Integrated USB (Universal Serial Bus) to Serial Converter) Software for all common Windows operating systems Package Included:4 x receiver modules 3 x personal transponders 1 x PC interface box 1 x long data cable 3 x shot data cable 1 x USB (Universal Serial Bus) disk (RCM & Zround software, Driver)1 x power adapter ...

Description: Item Brand: Das Mikro Item Name: Short Antenna Surface Receiver
Material: Plastic & metal
Colour:

...

Description: This RC receiver unit is Sanwa high speed FHSS-4 & FHSS-3 compatible.
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable
...

Description: This RC receiver unit is Sanwahigh speed FHSS-4 & FHSS-3 compatible.
Features:1. Sanwa 2.4 G Hz FH3/FH4 Selectable
...