FlySky FTr10 2.4G 10CH AFHDS 3 RC Receiver Support I-BUS/S-BUS/PPM
Output Compatible PL18 For RC Drone

Product Description

Fly Sky FTr 10 2.4G 10CH AFHDS 3 RC Receiver Support i-BUS/S-BUS/PPM Output Compatible PL18 for RC Drone OVERVIEW:FTr 10 adopts AFHDS 3, Flyskys third-generation automatic frequency hopping digital system. It uses a double-antenna bidirectional transmission system & is uniquely to save space & output standard PPm i-BUS & s-bus signals. Description: Brand Name: Fly Sky Item Name: FTr 10 Receiver
Size: 52*28*22mm Weight: 41g RF: 2.4 G Protocol: AFHDS 3 Data port: i-BUS/S-BUS/PPM/PWM/URATRSSI: Yes Antenna type: Dual antenna (103mm * 2) Power input: 3.5v-18VPWM channels: YESRemote control distance: 10KM (open & no interference limit distance) Update online: Yes Temperature: -15-+60 Humidity: 20%-95% Certification: CE, RCM, FCC ID: N4ZFTR1000 Binding:1. Insert the bind cable into the receivers bind port 2. Plug the power cable into any other port, & the receivers LED will start to flash quickly indicating that it has entered bind mode 3. Put the transmitter into bind mode; (See the transmitters instruction manual for more information)4. Binding is successful when the receivers LED will stop flashing Remove the power & bind cables from the receiver.5. Reconnect the power cable to the receiver 6. Check to make sure that the transmitter & receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again. Attention: Make sure the product is installed & calibrated correctly, failure to do so may result in serious injury. Make sure the receivers bat