Holybro Atlatl 5.8G 40CH 25m W 100m W mini FPV Video Transmitter 4.5-5.5V 19x 16mm for RC FPV Racing Drone Specification: Brand name: Holybro Item name: Atlatl Mini FPV Video Transmitter Output Power: 0.5 m W (pit mode), 25 m W, 100 m W Antenna Connector: MMCX Input Voltage: 4.5 to 5.5 volts (nominal 5v power) Dimensions: 19x 16x 4.5mm Weight: 1.6g (without antenna) Feature: Compatible with all major FPV receivers from vendors such as Fatshark, Immersion RC, etc. Supports the standard 40-channel set: band A, B, E, Fatshark, & Raceb&. TBS Telemetry Protocol input allows remote control by the flight controller. Change channel, transmit power, & more from Betaflight OSD, flight controller USB (Universal Serial Bus) port, Taranis Lua Script, & more. MMCX connector is durable & easy to use. Rated for 100s of mating cycles. Easy & quick antenna changes. No more ripped-off UFL connectors. Variable transmit power 25 m W or 100 m W. 0.5 m W True Pit Mode means that you can power up safely without the risk of knocking other pilots out of the air. Tiny form factor for easy installation in tight racing builds. Atlatl Mini VTX English Manual Package Included:1 x Atlatl Mini FPV Video Transmitter ...

Holybro Atlatl HV micro V1.0 5.8G 40CH 25/200/500/800m W Switchable VTX FPV Transmitter Specification: Brand Name: Holybro Model: Atlatl HV micro V1.0 Item Name:5.8G 40CH 25/200/500/800m W Switchable FPV Transmitter Output Power: 0.5 m W (pit mode), 25 m W, 200 m W, 500 m W, 800 m W Audio: 6.5 MHz Mono Antenna Connector: MMCXInput Voltage: 7 to 21 volts (2-4S Li Po) with absolute maximum 30 volts Dimensions: 30x 26x 7mm Mounting Holes: Standard 20mm square to center of holes Weight: 3.6g

Features:- Compatible with all major FPV receivers from vendors such as Fatshark, Immersion RC, etc.- Supports the standard 40-channel set: band A, B, E, Fatshark, & Raceb&.- Smart Audio input allows remote control by the flight controller. Change channel, transmit power, & more from Betaflight OSD, flight controller USB (Universal Serial Bus) port, Taranis Lua Script, & more.- All parameters are controllable via push-button on the side of the unit, for cases where Smart Audio is not used.- MMCX connector is durable & easy to use. Rated for 100s of mating cycles. Easy & quick antenna changes. No more ripped-off UFL connectors.- LED indicators for channel, b&, & power. Allows easy check of v TX parameters simply by glancing at the quad.- Variable transmit power from 25 m W to 800 m W. Use 25 m W for a race & then easily switch to 800 m W for freestyle.- 0.5 m W True Pit Mode means that you can power up safely without the risk of knocking other pilots out of the air.- Built in microphone, so you can listen to your motors while you fly

...

Holybro Base Board for PIX32 V5 Flight Controller RC Drone Multirotor Specification: Brand name: Holybro Item name: Base Board Suitable for PIX32 V5 Flight Controller Holybro_PIX32-V5-Base Board-Schematic diagram.pdf Holybro_PIX32-V5-Base Board-Layout.dxf Holybro_PIX32-V5-Base Board-Components Layout.pdf Package Included:1 x Base Board ...

Holybro Cable Set for Holybro PIX32 V5 Pixhawk Flight Controller RC Drone Multirotor Specification: Brand name: Holybro Item name: Cable Set for Holybro PIX32 V5 Pixhawk Flight Controller Package Included:3 x 6 to 6 pin cable (power Telem)3 x 4 to 4 pin cable (CANI2C)1 x 8 to 8 pin cable (CAP)1 x 7 to 7 pin cable (SPI)1 x DSMX receiver cable 1 x PPM/SBUS out cable 1 x Debug cable 1 x USB (Universal Serial Bus) (type-c)cable ...

Holybro FUTABA Fasst Compatible Receiver for T8FG T14FG 12Z T18MZSpecification: Brand name: Holybro Operating Current: 50m A max Operating Voltage: 3.5V-9.5 V Latency: S.BUS mode:14m S @ FASST multi-channel mode, 16m S @ FASST 7ch mode Sensitivity: Approx -90d Bm Weight: Approx 2g Dimensions: 31*28mm Output mode: S.BUSNumber of channels: 14 Range: Approx 1km
Size:31*28mm Usage: FUTABA Fasst compatible receiver, the minitype receiver designed for FPV drone (T8FG, T14FG, 12Z, T18MZ) Package included:1 x Holybro Receiver
...

Holybro Durandal (beta) Ardupilot Flight controller PM07 Power Module for RC FPV Racing Drone Durandal is the latest update to the successful family of Holybro flight controllers. It was designed & developed by Holybro, optimized to run the latest Ardupilot firmware. It features the latest advanced processor technology from STMicroelectronics, sensor technology from Bosch & Inven Sense, & a Chibi OS real-time operating system, delivering incredible performance, flexibility, & reliability for controlling any autonomous vehicle. Durandals STM32H7 microcontroller, running at 480 M Hz, has 2 MB of Flash memory & 1 MB of RAM. With the increased processor power & ample resources, developers can freely implement more complex algorithms & models on the autopilot. Dual high-performance, low-noise IMUs on board are designed for demanding stabilization applications. Data-ready signals from all sensors are routed to separate interrupt & timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolation enables more accurate readings, allowing vehicles to achieve better overall flight performance. The two external SPI buses & six associated chip select lines allow for additional sensors & an SPI-interfaced payload. There are a total of four I2C buses: two dedicated for external use & two grouped with serial ports for GPS/compass modules. The Durandal is the latest update to the successful family of Holybro flight controllers ...

Holybro Durandal (beta) Ardupilot Flight Controller PM07 Power Module UBLOX NEO-M8N GPS for RC Drone Durandal is the latest update to the successful family of Holybro flight controllers. It was designed & developed by Holybro, optimized to run the latest Ardupilot firmware. It features the latest advanced processor technology from STMicroelectronics, sensor technology from Bosch & Inven Sense, & a Chibi OS real-time operating system, delivering incredible performance, flexibility, & reliability for controlling any autonomous vehicle. Durandals STM32H7 microcontroller, running at 480 M Hz, has 2 MB of Flash memory & 1 MB of RAM. With the increased processor power & ample resources, developers can freely implement more complex algorithms & models on the autopilot. Dual high-performance, low-noise IMUs on board are designed for demanding stabilization applications. Data-ready signals from all sensors are routed to separate interrupt & timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolation enables more accurate readings, allowing vehicles to achieve better overall flight performance. The two external SPI buses & six associated chip select lines allow for additional sensors & an SPI-interfaced payload. There are a total of four I2C buses: two dedicated for external use & two grouped with serial ports for GPS/compass modules. The Durandal is the latest update to the successful family of Holybro flight cont ...

Only US$86.99, buy best holybro fettec g 4 2-6s kiss fc flight controller with 5v/16v bec support tbs unify pro nano vtx for rc drone fpv racing compatible 20x 20mm 30.5x 30.5mm sale online store at wholesale price. ...

Only US$205.19, buy best holybro h-rtk neo-f 9p gps integrated gnss receiver rm 3100 compass for base station / fixed wing / multi-copter sale online store at wholesale price. ...

Only US$478.99, buy best holybro h-rtk unicore um 982 dual antenna gps module built-in compass high-precision positioning for fpv racing drone rc helicopter airplane quadcopter sale online store at wholesale price. ...