Specification: Emitter:3 LEDs on a copper DTP MCPCB e.g.XP-L HI 3D NW 5000KXP-L HI 1A CW 6500 K Luminus SST20 4000 K Optic: Standard TIR optical lens Flux:~2800 lm (XP-L Hi) Intensity:~12 500 cd ANSI throw ~223 m (XP-L Hi) Firmware: Free software called Andrilfromhttp://tiny.cc/TKAnduril User interfaces:[1] By default the FW3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.[2]A more conventional STEPPED RAMPINGUI is available if youlike discrete modes level. You can choose how many steps you want[3]MOMENTARYmode is useful for signaling purposes or rapidly/brieflylighting up targets. To exit this mode, physically disconnect power[4]MUGGLEmode uses a reduced output.[5] It has an electronic LOCKOUTfor safety, but acts also as momentarylow light. Other functions: Battery check, sunset, beacontactical strobe, party strobe, bike flasher, candlelight, lightning storm Battery:1x 21700 or 18650 Battery An unprotected cell is recommended. Max. length 75mm (21700) Driver:FET+7+1 driver. Low parasitic drain while OFFBody: Aluminum with hard-coat anodizing Switch: Electronic tail switch Ingress rating: Equivalent to IPX8 Weight: Approximately 67.5g without cells
Size:27 mmhead x 102mm length User Manual:FW3A Germany User manual FW3A English User manual Package included:1 x LUMINTOP FW21 EDC Flashlight 1 x Clip 2 x O-rings 1 x Manual Accessory Recommended: Lumintop Self Illuminate Turboglow Glow Gaskethttps://www.banggood.com/ Lumintop-2x 19_7mm-Self-Illuminate-Turboglow-Glow-Gasket-For-FW3A-Carclo-1
...

Thank you for supporting this community project. The FW3A was designed by Fritz 15 & the flashlight forums TLFBLF. Brought to life by Lumintop. It is an ultra-compact & high-intensity flashlight with the only 92.5mm in length, & it delivers a max 2800 lumens amazing output by one 18650 battery. The metal & electronic tail switch control various functions including smooth ramping, stepped mode setting, strobe, etc. It is the EDC flashlight choice best if you are a flashaholic, flashlight collector, etc. Specifications &
Features: Name Tactical Flashlight Brand LUMINTOPModel FW3 A Emitter 3XP-L Hi, Nichia 219CT, & Luminus SST20 LEDOptic Standard TIR optical lens Flux~2800 lm (XP-L Hi) Intensity~10 000cd ANSI throw ~200 m (XP-L Hi) Firmware Free software called Andril Battery One 18650 cell. An unprotected cell is recommended. Max. length 66mm (Cell is not included) Driver FET+7+1 driver. Low parasitic drain while OFFBody Aluminum with hard-coat anodizing Body color Army Green Switch Electronic tail switch Ingress rating Equivalent to IPX8 Weight Approximately 53 g without cells Size 25.5 mmhead x 92.5 mm length Other functions Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm User interfaces[1] Defaulted SMOOTH RAMPING. Instant access to TURBO mode is also provided[2] STEPPED RAMPING UI[3] MOMENTARY mode[4] MUGGLE mode[5] Electronic LOCKOUTUser Manual:FW3A Germany User manual FW3A English User manual Package Included:1 x LUMINTOP FW3A Titanium 3
...

Thank you for supporting this community project. The FW3A was designed by Fritz 15 & the flashlight forums TLFBLF. Brought to life by Lumintop. It is an ultra-compact & high-intensity flashlight with the only 92.5mm in length, & it delivers a max 2800 lumens amazing output by one 18650 battery. The metal & electronic tail switch control various functions including smooth ramping, stepped mode setting, strobe, etc. It is the EDC flashlight choice best if you are a flashaholic, flashlight collector, etc. Specifications &
Features: Name Tactical Flashlight Brand LUMINTOPModel FW3 A Emitter 3XP-L Hi, Nichia 219CT, & Luminus SST20 LEDOptic Standard TIR optical lens Flux~2800 lm (XP-L Hi) Intensity~10 000cd ANSI throw ~200 m (XP-L Hi) Firmware Free software called Andril Battery One 18650 cell. An unprotected cell is recommended. Max. length 66mm (Cell is not included) Driver FET+7+1 driver. Low parasitic drain while OFFBody Aluminum with hard-coat anodizing Body color Blue Switch Electronic tail switch Ingress rating Equivalent to IPX8 Weight Approximately 53 g without cells Size 25.5 mmhead x 92.5 mm length Other functions Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm User interfaces[1] Defaulted SMOOTH RAMPING. Instant access to TURBO mode is also provided[2] STEPPED RAMPING UI[3] MOMENTARY mode[4] MUGGLE mode[5] Electronic LOCKOUTUser Manual:FW3A Germany User manual FW3A English User manual Package Included:1 x LUMINTOP FW3A Titanium 3x XP-L
...

Introduction: The FW3A was designed by Fritz 15 & the flashlight forums TLFBLF. Brought to life by Lumintop.A small 18650 triple LED lamp with tail switch & agreat, a compact, ergonomic, feature-packed EDC-style light. Specification: Emitter Three LEDs on a copper DTP MCPCB e.g.LEDColor temperature XP-L HI 6500KSST20 4000 K Nichia 219C 4000 K Optic Standard TIR optical lens Flux~2800 lm (XP-L Hi) Intensity~12 500 cd ANSI throw ~223 m (XP-L Hi) Firmware The FW3A uses free software called Andúril, distributed under the terms of the GPL v 3. Code is available fromhttp://tiny.cc/TKAnduril User interfaces[1] By default the FW3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.[2]A more conventional STEPPED RAMPINGUI is available if youlike discrete modes level. You can choose how many steps you want[3]MOMENTARYmode is useful for signaling purposes or rapidly/brieflylighting up targets. To exit this mode, physically disconnect power[4]MUGGLEmode uses a reduced output.[5] It has an electronic LOCKOUTfor safety, but acts also as momentarylow light. Other functions: Battery check, sunset, beacontactical strobe, party strobe, bike flasher, candlelight, lightning storm Battery One flat-top or button-top 18650 cell. Anunprotected cell is recommended. Max. length 66 mm. Cell is not included. Driver FET+7+1 driver. Low parasitic drain while OFFBody: Aluminum with hard-coat anodizing Switch: Electronic tail switch Ingress rating Equivalent to IPX7 Weight Approximately 53 g without cells Size 25.5 ...

Introduction: Thank you for supporting this community project. The FW3A was designed by Fritz 15 & the flashlight forums TLFBLF. Brought to life by Lumintop. It is an ultra-compact & high-intensity flashlight with the only 92.5mm in length, & it delivers a max 2800 lumens amazing output by one 18650 battery. The metal & electronic tail switch control various functions including smooth ramping, stepped mode setting, strobe, etc. It is the EDC flashlight choice best if you are a flashaholic, flashlight collector, etc.FW3A Copper is the copper material version FW3A. Specification: Brand: Lumintop Model:FW3A Copper Emitter Color temperature: Three LEDs on a copper DTP MCPCB e.g.XP-L HI 1A: (CW 6500K)SST20: (NW 4000K) Nichia 219C: (NW 4000K) Light
Colour:XP-L HICool white SST20 Neutral white Nichia 219C Neutral white Optic: Standard TIR Carclo 10511 optical lens Flux:2800 lm (XP-L Hi) Intensity:10 000cd ANSI throw ~200 m (XP-L Hi) Firmware: The FW3A uses free software called Andril, distributed under the terms of the GPL v 3. Code is available fromhttp://tiny.cc/TKAnduril User interfaces:[1] Defaulted SMOOTH RAMPING. Instant access to TURBO mode is also provided.[2] STEPPED RAMPING UI.[3] MOMENTARY mode.[4] MUGGLE mode. [5] Electronic LOCKOUT.[5] Other functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm Battery: One flat-top or button-top 18650 cell. Anunprotected cell is recommended. Max. length 66 mm. Cell is not incl
...

Specification: Name Flashlight Tail Switch Color Blue, Green, Yellow, Red Suitable for LUMINTOP FW3A Flashlight
Features:
...

Thank you for supporting this community project. The FW3A was designed by Fritz 15 & the flashlight forums TLFBLF. Brought to life by Lumintop. It is an ultra-compact & high-intensity flashlight with the only 92.5mm in length, & it delivers a max 2800 lumens amazing output by one 18650 battery. The metal & electronic tail switch control various functions including smooth ramping, stepped mode setting, strobe, etc. It is the EDC flashlight choice best if you are a flashaholic, flashlight collector, etc. Specifications &
Features: Name Tactical Flashlight Brand LUMINTOPModel FW3 A Emitter 3XP-L Hi, Nichia 219CT, & Luminus SST20 LEDOptic Standard TIR optical lens Flux~2800 lm (XP-L Hi) Intensity~10 000cd ANSI throw ~200 m (XP-L Hi) Firmware Free software called Andril Battery One 18650 cell. An unprotected cell is recommended. Max. length 66mm (Cell is not included) Driver FET+7+1 driver. Low parasitic drain while OFFBody Aluminum with hard-coat anodizing Body color Titanium Switch Electronic tail switch Ingress rating Equivalent to IPX8 Weight Approximately 53 g without cells Size 25.5 mmhead x 92.5 mm length Other functions Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm User interfaces[1] Defaulted SMOOTH RAMPING. Instant access to TURBO mode is also provided[2] STEPPED RAMPING UI[3] MOMENTARY mode[4] MUGGLE mode[5] Electronic LOCKOUTUser Manual:FW3A Germany User manual FW3A English User manual Package Included:1 x LUMINTOP FW3A Titanium 3x
...

Add two options: Nichia 219C 4000K / SST20 4000K (high CRI) Introduction: The FW3A was designed by Fritz 15 & the flashlight forums TLFBLF. Brought to life by Lumintop.A small 18650 triple LED lamp with tail switch & agreat, a compact, ergonomic, feature-packed EDC-style light. Specification: Emitter: Three LEDs on a copper DTP MCPCB e.g.XP-L HI 3D (NW 5000K)XP-L HI 1A (CW 6500K) Optic: Standard TIR optical lens Flux:~2800 lm (XP-L Hi) Intensity:~12 500 cd ANSI throw ~223 m (XP-L Hi) Firmware: The FW3A uses free software called Andril, distributed under the terms of the GPL v 3. Code is available fromhttp://tiny.cc/TKAnduril User interfaces:[1] By default the FW3A is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provided.[2]A more conventional STEPPED RAMPINGUI is available if youlike discrete modes level. You can choose how many steps you want[3]MOMENTARYmode is useful for signaling purposes or rapidly/brieflylighting up targets. To exit this mode, physically disconnect power[4]MUGGLEmode uses a reduced output.[5] It has an electronic LOCKOUTfor safety, but acts also as momentarylow light. Other functions: Battery check, sunset, beacontactical strobe, party strobe, bike flasher, candlelight, lightning storm Battery: One flat-top or button-top 18650 cell. Anunprotected cell is recommended. Max. length 66 mm. Cell is not included. Driver:FET+7+1 driver. Low parasitic drain while OFFBody: Aluminum with hard-coat anodizing Switch: Electronic tail switch Ingress rating: Equivalent to IPX7W ...

Specification: Brand LUMINTOPModel GLOWⅠOSRAMBattery 10180 Material Aluminum alloy Waterproof AIP68 Time About 70 Minutes Feature: The Netherlands imported turbo glow material on the head with over 2hous long-lasting glow & make it easy to be found in the dark Utilizes OSRAM LED with 50, 000 hours lifetime Magnetic tail cap enable for hands-free Built-in Micro USB (Universal Serial Bus) rechargeable with indicator, new charging type that no need to separate the tube from the head One mode (40 lumens) with 1h 10min max runtime Built-in 3.7/80m Ah 10180 Li-ion battery, 57min fast charging Handy & light-weight, size 47.4*14.5*12.1mm, net weight 16.1g with battery TIR optical lens creates a soft & balance beam Make of aircraft-grade aluminum alloy with military-grade type III HA matt finish IP68 rated dust & waterproof protection, impact resistance to 2 meters 2 years free repair, limited lifetime warranty Package included:1 x Flashlight ...

Specification: Brand LUMINTOPTypenatural whitecool white Flux 1000 lm Throw 400 m~50 Kcd Battery 14500 battery (cant work with AA battery) (not include) Driver Texas avenger FET driver Reflector 29 mm ID, aluminum, smooth finish Lens Glass with anti-reflective coating Body Aluminum with Type III hard-coat anodizing Button Tactile with back-lit rubber boot Waterproof Equivalent to IP65, do not immerse in liquids Dimensions 36 x 105mm / 1.42 x 4.13inch Weight 70g
Features:[1] By default the GT micro is set touse the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5ATURBOmode is also provided.[2] A more conventional discrete level MODE-SETUI is available as an alternative. Any one of 12 pre-defined mode-sets can be selected.[3]MOMENTARYmode is useful forsignaling purposesor rapidly/briefly lighting up targets. Package include:1 x Flashlight Note: not include battery
...