United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Sunhans 3000mW 35dBm 2.4GHz 11b/g/n Wireless WiFi Signal Booster
Signal Amplifier
Sunhans 3000mW 35dBm 2.4GHz 11b/g/n Wireless WiFi Signal Booster Signal AmplifierThis indoor signal booster can increase the effective range and coverage area of your Wi-Fi network., It is Ideal for increase the 2000-2500Mhz frequency devices.Description:Model: SH24BTA-NP/N: 24BTAN24014Barcode: 6958917600827Operating range: 2400~2500MHzChannel width: 20Mhz40MhzSupported standards: IEEE 802.11b/g/nOperation mode: Bi-directional, half-duplex, time division duplexConnector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)Output power: 3000mW (35dBm)Input power: 0 ~ 20dBmTransmit gain: 15 - 18dBReceiver gain: is less than or equal to 12dBNoise figure: = 3.5dB typicalFrequency response: + 1dB over operating rangePower adapter: 12V/2A DC, 100~240VOperating
temperature: -20 C to +70 degrees C degreesOperating humidity: Up to 75% relative humidityMaterial: Cast aluminumLED light: Power status LED and activity status LEDBooster weight: 150gBooster size: 8.4 x 4.7 x 1.7cmPackage weight: 450gPackage size: 21.3 x 13.5 x 5cmUseStep 01: Remove the Antenna from the Wireless Router (Access Point).Step 02: Use this cable (RG316) to connect Amplifier input port with router output port: note that cable is in standard spec.Step 03: Connect the antenna with output port of Amplifier.Step 04: Power the amplifier with the matching source adapter: DC 12V.Attention: The power amplifier is not suitable for use in high power devicesPackage Included:1 x SH24BTA-N Wifi Signal Bo
temperature: -20 C to +70 degrees C degreesOperating humidity: Up to 75% relative humidityMaterial: Cast aluminumLED light: Power status LED and activity status LEDBooster weight: 150gBooster size: 8.4 x 4.7 x 1.7cmPackage weight: 450gPackage size: 21.3 x 13.5 x 5cmUseStep 01: Remove the Antenna from the Wireless Router (Access Point).Step 02: Use this cable (RG316) to connect Amplifier input port with router output port: note that cable is in standard spec.Step 03: Connect the antenna with output port of Amplifier.Step 04: Power the amplifier with the matching source adapter: DC 12V.Attention: The power amplifier is not suitable for use in high power devicesPackage Included:1 x SH24BTA-N Wifi Signal Bo
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark