United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
X-BOSS AC900 V2 0.9g RC Mini Dual-core Receiver Support S-FHSS FRSKY
D16 (NO Telemetry) For RC Racing Drone
X-BOSS AC900 V2 0.9g RC Mini Dual-core Receiver Support S-FHSS FRSKY D16 (NO Telemetry)for RC Racing DroneDescription:Item name: AC900 Mini ReceiverRate voltage: 4.0~6.0VSize 10 x 16.5 mmWeight: only 0.9gPerfect fit small racing droneInclude high-performance discrete LNA chipReceiver workingdistance200MS-FHSS mode support 14SG/16SZ/18SZ/18MZ etc.D16 mode support Frsky X9D/X12S etc.STATUS LED: LED of AC900 blink twice then solid when power on, the meaning as follow.First blink (receive mode)Second blink (failsafe mode)Then solid (signal status)S-FHSSFailsafe mode 1No signalFRSKY D16Failsafe mode 2Signal receivedBIND: check receive mode before bind, the first blink after power on indicate the setting, Red isS-FHSS, Green isD16.S-FHSS BINDFRSKY D16 (NO Telemetry)BINDTurn on the TX then
power on AC900 while pressingthe key, green LED fast blink meaning already in bindmode, user can release the key. Bind procedure iscompleted and the receiver is working normally whengreen LED is solid.Power on AC900 while pressing the key, green LED fastblink meaning already in bind mode, user can releasethe key, then set your TX into D16 bind mode. red LEDsolid meaning bind finished, exit TX from bind mode, receivers green LED solid meaning working normally.FAILSAFE: second blink after power on indicate failsafe setting, please make sure failsafe is working correctly!FAILSAFE MODE 1FAILSAFE MODE 2After 1 second when lost transmitter signal, S.BUSkeep output, Throttle will 988us, all other channel
power on AC900 while pressingthe key, green LED fast blink meaning already in bindmode, user can release the key. Bind procedure iscompleted and the receiver is working normally whengreen LED is solid.Power on AC900 while pressing the key, green LED fastblink meaning already in bind mode, user can releasethe key, then set your TX into D16 bind mode. red LEDsolid meaning bind finished, exit TX from bind mode, receivers green LED solid meaning working normally.FAILSAFE: second blink after power on indicate failsafe setting, please make sure failsafe is working correctly!FAILSAFE MODE 1FAILSAFE MODE 2After 1 second when lost transmitter signal, S.BUSkeep output, Throttle will 988us, all other channel
%20for%20RC%20Racing%20Drone "Pin It")
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark