Holybro Kakute F7 V1.5 Flight Controller Atlatl HV V2 VTX4 PCS 65A BL_32 Tekko 32 F3 Metal ESC Combo Specification: Brand Name: Holybro Tekko 32 F3 Metal ESCModel: Tekko 32 F3 Metal Item Name: 65A BL_32 DShot 1200 ESCQuantity: 4 PCSCon. Current: 65 A Peak Current: 80 A Input Voltage: 3-6S Lipo Support Ext. cap needed for 6s (220uf 35v for 6s usage.)- F3 (M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108 Mhz- Mosfet tested at 4S 65A, under props, nothing covered for 1min- Onboard WS2812B LED
Size: 18 x 27 mm Weight: 4.4g/PCKakute F7 V1.5 AIO (Manual) Item Name: F7 Flight Controller AIO OSD BEC & Current Sensor MCU: STM32F745 32-bit processor IMU: MPU6000 (SPI) Barometer: BMP280 Current Sensor: Approx. 130 amps maximum measurable value USB VCP Driver (all UARTs usable simultaneously; USB (Universal Serial Bus) does not take up a UART)6 hardware UARTS (UART1, 2, 3, 4, 6, 7) All UARTS support hardware inversion. SBUS, Smart Port, & other inverted protocols work on any UART without uninvert hack. Supports serial receivers (SBUS, i Bus, Spektrum, Crossfire) only. PPM & PWM receivers are not supported.TF card for Blackbox logging Dimensions: 35x 48x 7mm (
Includes: foam-mounted gyro board in height) Mounting Holes: Standard 30.5mm square to center of holes Weight: 11.2g Atlatl HV V2: Item Name: 5.8G 40CH 25/200/500/800m W FPV Transmitter Model: Atlatl HV V2 Transmitting Output Power: 25m W/ 200m W/ 500m W/ 800m W Switchable Audio: 6 MHz + 6.5 MHz Mono Antenna Connector: MMCXInput Voltage: 7-28V (2-6S Lipo) Dimen

...

The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flightcontroller (FC) & on-screen display (OSD) in one. The Kakute F7’s layout makes it easy towire up the other components of the multirotor while keeping the build neat & tidy.IMU upgraded to MPU6000, Re-designed & more reliable damping structure. Kakute F7 V1.5 Specifications:• MCU: STM32F745 32-bit processor• IMU: MPU6000 (SPI)• Barometer: BMP280• Current Sensor: Approx. 130 amps maximum measurable value• USB (Universal Serial Bus) VCP Driver (all UARTs usable simultaneously; USB (Universal Serial Bus) does not take up a UART)• 6 hardware UARTS (UART1, 2, 3, 4, 6, 7)• All UARTS support hardware inversion. SBUS, Smart Port, & other inverted protocols work onany UART without “uninvert hack”.• Supports serial receivers (SBUS, i Bus, Spektrum, Crossfire) only. PPM & PWM receivers are notsupported.• TF card for Blackbox logging• Dimensions: 35x 41x 7mm (
Includes: foam-mounted gyro board in height)• Mounting Holes: Standard 30.5mm square to center of holes• Weight: 8g
Features:• Supports Betaflight, Butterflight, & Cleanflight.• Betaflight OSD. Change PIDs, adjust common configuration parameters, & change videotransmitter channel & power level, all using your transmitter sticks & goggles.• Soft-mounting built in. The IMU (“gyro”) chip on this board is mounted on vibration-isolatingfoam. This means that there is no need to soft-mount the board itself.• High-performance / low-noise / high sensitivity IMU. MPU6000 with 6-ax

...

The Holybro Kakute F7flightcontrollermakesiteasytobuildyourmultirotor. Itintegratesflight controller (FC)andon-screendisplay (OSD)inone. The Kakute F7slayoutmakesiteasytowireuptheothercomponentsofthemultirotorwhilekeepingthebuildneatandtidy. IMUupgradedto MPU6000, Re-designedandmorereliabledampingstructure Specifications MCU:STM32F74532-bitprocessor IMU:MPU6000 (SPI) Barometer:BMP280 Current Sensor: Approximately 130ampsmaximummeasurablevalue USBVCPDriver (all UARTsusablesimultaneously;USBdoesnottakeupa UART)6hardware UARTS (UART1, 2, 3, 4, 6, 7) All UARTSsupporthardwareinversion.SBUS, Smart Port, andotherinvertedprotocolsworkonany UARTwithoutuninverthack. Supportsserialreceivers (SBUS, i Bus, Spektrum, Crossfire)only.PPMand PWMreceiversarenotsupported.TFcardfor Blackboxlogging Dimensions:35x 41x 7mm (
Includes:foam-mountedgyroboardinheight) Mounting Holes: Standard 30.5mmsquaretocenterofholes Weight:8g Features Supports Betaflight, Butterflight, and Cleanflight. Betaflight OSD. Change PIDs, adjustcommonconfigurationparameters, andchangevideotransmitterchannelandpowerlevel, allusingyourtransmittersticksandgoggles. Soft-mountingbuiltin. The IMU (gyro)chiponthisboardismountedonvibration-isolatingfoam. Thismeansthatthereisnoneedtosoft-mounttheboarditself. High-performance/low-noise/highsensitivity IMU.MPU6000with 6-axisgyroandaccelerometer. Readyforautonomousflight: Integrated BMP280barometerand SCL/SDApadsforusewithexternal GPS/magnetometerunits. Dedicatedbootloaderbuttonforeasyfirmwareflashing. Low-profiledesignfitsintoevenverycompactframes. Inputvoltage 7vto 42
...

Only US$95.99, buy best holybro kakute h 743-wing flight controller support inav ardupilot for fixed wing & vtol rc airplane sale online store at wholesale price. ...

Description: Brand: Holybro Usage: Kakutef 7 1.5, Kakutef 7 V1.5 AIO IMU Spare Part IMU: MPU6000 (SPI) Package Included:1 x Holybro Kakute F7 V1.5 IMU FPC Board ...

Holybro Kopis 1 FPV Racing Drone Spare Part 5048 3 Blade Propeller 2 Pairs Description: Brand: Holybro Item name: 5048 3 blade propeller

...

Holybro Kopis 1 FPV Racing Drone Spare Part Battery Pad 20*45*2mm Description: Brand: Holybro Item name: battery pad
Size:
...

Holybro Kopis 1 FPV Racing Drone Spare Part DIY Handbag Carrying Case Description: Brand: Holybro Item name: carrying case

...

Holybro Kopis 1 FPV Racing Drone Spare Part LED Board Taillight Tail LED Light with Loud Buzzer Description: Brand: Holybro Item name: Tail LED Light Quantity: 1 Usage: for Holybro Kopis 1 FPV racing drone Package included:1 x Tail LED Light ...

Holybro Kopis 149mm 3 Inch 4S Cine Whoop FPV Racing Drone with DJI FPV Air Unit Kakute F7 HDV FC Tekko 32 45A ESC 1507 3800KV Motor Note: The DJI FPV Air Unit is not included. Specification: Brand name: Holybro Item name: Kopis 149mm 3 Inch 4S Cine Whoop Frame:3mm 3kcarbonfiber Flight Controller: Kakute F7HDVESC: Tekko 32F34in 145 Amini ESCVTx:DJIFPVAir Unit Motor: F1507KV3800 Propeller: T3140 Battery plug: XT60 Wheelbase:148.6mm Weight:274g (included DJI air unit) Recommend battery: 650mah~1300mah 4 S User Manual, DOWNLOADPackage Included:1 x Kopis Cine Whoop FPV Racing Drone 4 x T3140 Propeller 1 x Battery Strap (installed) ...