Holybro Kakute F7 V1.5 Flight Controller Atlatl HV V2 VTX4 PCS 65A BL_32 Tekko 32 F3 Metal ESC Combo Specification: Brand Name: Holybro Tekko 32 F3 Metal ESCModel: Tekko 32 F3 Metal Item Name: 65A BL_32 DShot 1200 ESCQuantity: 4 PCSCon. Current: 65 A Peak Current: 80 A Input Voltage: 3-6S Lipo Support Ext. cap needed for 6s (220uf 35v for 6s usage.)- F3 (M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108 Mhz- Mosfet tested at 4S 65A, under props, nothing covered for 1min- Onboard WS2812B LED
Size: 18 x 27 mm Weight: 4.4g/PCKakute F7 V1.5 AIO (Manual) Item Name: F7 Flight Controller AIO OSD BEC & Current Sensor MCU: STM32F745 32-bit processor IMU: MPU6000 (SPI) Barometer: BMP280 Current Sensor: Approx. 130 amps maximum measurable value USB VCP Driver (all UARTs usable simultaneously; USB (Universal Serial Bus) does not take up a UART)6 hardware UARTS (UART1, 2, 3, 4, 6, 7) All UARTS support hardware inversion. SBUS, Smart Port, & other inverted protocols work on any UART without uninvert hack. Supports serial receivers (SBUS, i Bus, Spektrum, Crossfire) only. PPM & PWM receivers are not supported.TF card for Blackbox logging Dimensions: 35x 48x 7mm (
Includes: foam-mounted gyro board in height) Mounting Holes: Standard 30.5mm square to center of holes Weight: 11.2g Atlatl HV V2: Item Name: 5.8G 40CH 25/200/500/800m W FPV Transmitter Model: Atlatl HV V2 Transmitting Output Power: 25m W/ 200m W/ 500m W/ 800m W Switchable Audio: 6 MHz + 6.5 MHz Mono Antenna Connector: MMCXInput Voltage: 7-28V (2-6S Lipo) Dimen