United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Holybro Kakute F4 V2 Flight Controller Tekko32 35A 4 In 1 Blheli 32
3-6S Brushless ESC
Holybro Kakute F4 V2 Flight Controller Tekko32 35A 4 In 1 Blheli 32 3-6S Brushless ESCNote: The ESC board had chagned to the one with Copper foil.KAKUTE F4 FLIGHT CONTROLLER V2The Holybro Kakute F4 All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F4 V2s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.SpecificationsMCU: STM32F405RGT6 32-bit processorIMU: ICM20689 (SPI)Barometer: BMP280USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)5 hardware UARTS (UART1, 3, 4, 5, 6)Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not
supported.128 Mbit Dataflash chip for Blackbox loggingDimensions: 35x30x8mm (includes USB in height)Mounting Holes: Standard 30.5mm square to center of holesWeight: 7gFeatures- Supports Betaflight and Cleanflight.- Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.- Soft-mounting built in. The IMU (gyro) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.- New high-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.- 2 oz. copper PCB allows up to
supported.128 Mbit Dataflash chip for Blackbox loggingDimensions: 35x30x8mm (includes USB in height)Mounting Holes: Standard 30.5mm square to center of holesWeight: 7gFeatures- Supports Betaflight and Cleanflight.- Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.- Soft-mounting built in. The IMU (gyro) chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.- New high-performance / low-noise / high sensitivity IMU. ICM20689 with 6-axis gyro and accelerometer. Can run at up to 32 kHz.- 2 oz. copper PCB allows up to
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark