Matek FCHUB-W Fixed Wings PDB 3-6S Built-in 4 BEC & 104A Current Sensor for RC FPV Racing Drone Specification (user manual): Input voltage range: 9~30V (3~6S Li Po) w/TVS protection Current Senor: 104A, 3.3V ADC, Scale 317 Mounting: 30.5 x 30.5mm, Φ3mm Dimensions: 52 x 36 x 6 mm Weight: 13g 2x ESC power pads 4x BEC on board 3x LED indicators for 5V, 10V & Vx Soldering Holes & Pads:+ & –: Bettery & ESC power pads Curr: Current sensor output Vbat: Bettery voltage G: Ground 3V3: LDO 3.3V5V: BEC 5V10V: BEC 10 V Vx: BEC 5V/6V/7.2V ADJFFC connection: Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSDMT1: Motor 1 of INAV Flying Wing & Airplane MT2: Motor 2 of INAV Flying Wing & Airplane SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane VTX: Video Transmitter signal TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSDBEC 5V output: Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_ Strip, GPS module DC/DC synchronous buck regulator Voltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps, Max.3 A Output Ripple: 20m V (VIn=24V, VOut=5V@2A load) Short-circuit tolerant (2 seconds)BEC 10V output: Designed for Video Transmitter, Gimble DC/DC synchronous buck regulator Voltage: 10.0 +/- 0.2VDC (Input voltage >11V) Continuous current: 2 Amps, Max.3 A Output Ripple: 20m V (VIn=24V, VOut=10V@2A load) Short-circuit tolerant (2 seconds)BEC Vx output: Designed for Servos DC/DC synchronous buck regulator Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 5 Amps, Max.5.5 A Output Ripple: 50m V (VIn=24V, V ...

Only US$68.99, buy best matek flight controller f 405-te pdb/blackbox/osd/barometer ardupilot/inav/betaflight for rc fpv racing drone airplane quadcopter x 6 x 8 sale online store at wholesale price. ...

Only US$72.99, buy best matek flight controller f 405-vtol barometer osd microsd card blackbox 2-6s lipo ardupilot inav for rc racing drone fixed-wing airplane sale online store at wholesale price. ...

Only US$134.99, buy best matek flight controller h 743-wing v 3 ardupilot inav 3-8s for rc multirotor airplane fixed-wing drones sale online store at wholesale price. ...

Only US$54.99, buy best matek g 474-heli balance flybarless controller 2-6s lipo for rc helicopter sale online store at wholesale price. ...

Matek LED Tail light WS2512B with Loud Buzzer Dual Modes for FPV Racer Multicopters It comes as H Type tail light with 8x WS2812B LEDs Loud Buzzer. It provides dual control modes, can be controlled by Flight Controller firmware (Cleanflight, Betaflight, etc.) or Transmiter. Specification: Brand name: Matek Item name: LED Tail light with Buzzer board Dual modes: FC control TX control TX mode: LED 7 colors (White, Red, Green, Blue, Yellow, Magenta, Cyan) LED 5 status (Constant light, Slow blink, Fast blink, Voilent blink) Buzzer: Lost Plane Finder FC mode: support Naze 32, SPRacing F3, etc. with Clean Flight or Betaflight firmware Input voltage range: 4.5~5.2V DCPower of TX mode (5V IN ): 1W/0.2A~2W/0.4A Sizemounting: Pls check the Layout Weight: 5g Package Included:1 X LED Tail light with Buzzer board ...

Matek Lost Model Beeper Flight Controller 5V Loud Buzzer Built-in MCU for FPV Multicopters It can be used on triditional PWM receivers or FPV racing flight controller. The tiny buzzer is driven by on board MCU. It can output louder sound than 5V active buzzers. Specification: Brand name: Matek Item name: 5V Loud Buzzer Built-in MCUWorking voltage range: 4.5-5.2V DCPower: 1W Max. Sound Output: 90d B Max. Size: 18x 13x 8mm Weight: 2g User Manual, please click here. Package Included:1 X Buzzer ...

Matek Mini Power Hub Power Distribution Board With BEC 5V & 12V For FPV Multicopter The Mini POWER HUB has been engineered to provide the highest possible performance & reliability in a 36*36mm 4 layers PCB. The HUB distributes power from a battery pack to 4 ESCs, as well as providing two synchronisedregulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S Li Po, & the BEC input is TVS protected. The HUB also features convenient solder bridge of various voltage for cameravideo transmitter. Description:- Band name: Matek- Item name: Matek Power Distribution Board- Dimensions: 36 x 36mm- Weight: About 6g- Mounting holes 30.5mm square spacing

Features:- 2oz copper 4-layers PCB.- ESCBattery solder tabs in pairs.- Solder Bridges of various voltage for Camera VTX.- DC/DC synchronous buck regulator, Efficiency is up to 95%.- TVS (Transient Voltage Suppressor) protection for DC/DC chip.- 5V12V Output LED indicators Short circuit tolerant. Specification: General:- Input voltage range (2S-6S operation): 7.2
- 26VDC- Regulated 5V & 12V outputs- LED power indicators (5V12V outputs )- 4 ESC outputs ESC outputs:- Continuous current: 20A per output- Peak current (10 seconds/minute): 30A per output BEC 5V output:- Designed for RC Receivers, Flight controllers, OSD, & Servos.- Voltage: 5.0 +/- 0.1VDC- Continuous current: 3 Amps- Short-circuit tolerant (10 seconds/minute)- LED (indicates voltage is in regulation, within 10%)BE


...

MATEK PDB F722-PX-W for Fixed Wing Power Distribution Board RC Airplane Accessorie PDBInput voltage range: 6~36V (2~8S Li Po) w/TVS protection 2x ESC power pads High precision current Senor: 132A, 3.3V ADC, Scale 250BEC 5A, 5V/6V/7.2V Adj Soldering Holes Pads+: Bettery ESC power pads Curr: Current sensor output Vbat: Bettery voltage G: Ground 3V3: LDO 3.3V 500m A Vx: BEC 5V/6V/7.2V ADJSH1.0-8P connection RX3 & S1~S10 are compatible with MATEKSYS Flight controller F722-PXBEC Vx output Designed for Servos DC/DC synchronous buck regulator Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 5 Amps, Max.5.5 A Output Ripple: 50m V (VIn=24V, VOut=5V@5A load) Short-circuit tolerant (2 seconds) Physical Mounting: 30.5 x 30.5mm, 3mm Dimensions: 41 x 36 mm Weight: 9g Package Included 1 x PDB1 x JST-SH 1.0MM 8p 6cm 7 x M3 nut 10 x M3 crew 4 x M3 screw 1 x 8p 2.54 Pin ...

Matek RGB LED Board 5050 5V For FPV RC Quadcopter Multicopter Description:LED: 5050 lamp INPUT: 4~6V DC
Size: 47*10mm Weight:
...