Matek F405-STDBeta Flight STM32F405 Flight Controller + Matek FCHUB-6S Hub Power Distribution Board Specification: Matek F405-STD (user manual): Brand: Matek Systems Item name: Flight Control Board
Size: 36x 36mm Mounting hole: 30.5mm Weight: 7g MCU: 168 M Hz STM32F405RGT6IMU: 32K ICM20602 gyro/accelerometer (SPI) Baro: BMP280 (I2C)OSD: Beta Flight OSD w/ AT7456E chip Blackbox: Micro SD card slot (SD/SDHC)VCP, UART1, UART2, UART3, UART4, UART5 Built in inverter for SBUS input (UART2-RX)PPM/UART Shared: UART2-RXSoft Serial on TX2, S5 or S6 optional Camera control on S6 or DAC optional Smartaudio Tramp VTX protocol supported Battery Voltage Sensor: 1:10 Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)LDO 3.3V: Max.300m AI2C1 SDASCL: Yes WS2812 Led Strip: Yes Beeper: Yes RSSI: Yes Matek FCHUB-6S (user manual): Brand Name: Matek Model:FCHUB-6 S Item Name: Power Distribution Board Built-in Current Sensor
Size: 36x 36mm 30.5x 30.5mm Hole Mounting, M3 Weight: 8.5g BEC Output: 5V10V5V BEC Output:- Designed for RC Receivers, Flight Controllers, OSD & Servos.- DC/DC synchrous buck regulator- Voltage: 5.0V (4.9-5.1)DC
- Current: 1.5A (Max. 2.0A 10S/minute)- Short-circuit tolerant (2 Seconds/minuate)10V BEC Output:-Designed for VTX or FPV Camera- Voltage: 10.0V (9.8-10.2) DC
- Current: 1.5A (Max. 2.0A 10S/minute)- Short-circuit tolerant (2 Seconds/minuate)- 10V can be used to power cameras labeled as 12V.- The 3S Lipo input voltage should be 11V plus. Curr



...

Matek FCHUB-6S Hub Power Distribution Board 5V10V BEC Built-in 184A Current Sensor Describtion:-This PDB distribution power from from a 3-6S Lipo pack to 4 ESCs, as well as providing regulatedfiltered DC 5VDC 10V outputs for powering Cameras, RC receivers, Flight Controllers, Video Transmitters, LEDs, etc.- It also has buit-in 184A current sensor & offers a FFC socket to connect the Matek flight controller conviently. Specification: Brand Name: Matek Model:FCHUB-6 S Item Name: Power Distribution Board Built-in Current Sensor
Size: 36x 36mm 30.5x 30.5mm Hole Mounting, M3 Weight: 8.5g BEC Output: 5V10V5V BEC Output:- Designed for RC Receivers, Flight Controllers, OSD & Servos.- DC/DC synchrous buck regulator- Voltage: 5.0V (4.9-5.1)DC
- Current: 1.5A (Max. 2.0A 10S/minute)- Short-circuit tolerant (2 Seconds/minuate)10V BEC Output:-Designed for VTX or FPV Camera- Voltage: 10.0V (9.8-10.2) DC
- Current: 1.5A (Max. 2.0A 10S/minute)- Short-circuit tolerant (2 Seconds/minuate)- 10V can be used to power cameras labeled as 12V.- The 3S Lipo input voltage should be 11V plus. Current Sensor Module
- Max. Range: 184A- 3.3V ADC- Scale the output voltage to milliamps (1/10th m W/A): 179

Features:- Total 4 pairs ESC solder tabs are fix for X Type frame- Max. 27V input w/ TVS protection- Built-in current sensor 184A- PDB: 4*30A (4*46A, 5 seconds), 4 layers*2oz copper PCB-BEC 5V@1.5A (Max. 2A) w/ 100uf panasonic POSCAP filter
- BEC 10V@1.5A (Max. 2A) w/ 47uf TDK MLCC filter- 5V10V out






...

Matek FCHUB-W Fixed Wings PDB 3-6S Built-in 4 BEC & 104A Current Sensor for RC FPV Racing Drone Specification (user manual): Input voltage range: 9~30V (3~6S Li Po) w/TVS protection Current Senor: 104A, 3.3V ADC, Scale 317 Mounting: 30.5 x 30.5mm, Φ3mm Dimensions: 52 x 36 x 6 mm Weight: 13g 2x ESC power pads 4x BEC on board 3x LED indicators for 5V, 10V & Vx Soldering Holes & Pads:+ & –: Bettery & ESC power pads Curr: Current sensor output Vbat: Bettery voltage G: Ground 3V3: LDO 3.3V5V: BEC 5V10V: BEC 10 V Vx: BEC 5V/6V/7.2V ADJFFC connection: Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSDMT1: Motor 1 of INAV Flying Wing & Airplane MT2: Motor 2 of INAV Flying Wing & Airplane SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane VTX: Video Transmitter signal TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSDBEC 5V output: Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_ Strip, GPS module DC/DC synchronous buck regulator Voltage: 5.0 +/- 0.1VDCContinuous current: 2 Amps, Max.3 A Output Ripple: 20m V (VIn=24V, VOut=5V@2A load) Short-circuit tolerant (2 seconds)BEC 10V output: Designed for Video Transmitter, Gimble DC/DC synchronous buck regulator Voltage: 10.0 +/- 0.2VDC (Input voltage >11V) Continuous current: 2 Amps, Max.3 A Output Ripple: 20m V (VIn=24V, VOut=10V@2A load) Short-circuit tolerant (2 seconds)BEC Vx output: Designed for Servos DC/DC synchronous buck regulator Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 5 Amps, Max.5.5 A Output Ripple: 50m V (VIn=24V, V ...

Only US$68.99, buy best matek flight controller f 405-te pdb/blackbox/osd/barometer ardupilot/inav/betaflight for rc fpv racing drone airplane quadcopter x 6 x 8 sale online store at wholesale price. ...

Only US$72.99, buy best matek flight controller f 405-vtol barometer osd microsd card blackbox 2-6s lipo ardupilot inav for rc racing drone fixed-wing airplane sale online store at wholesale price. ...

Only US$54.99, buy best matek g 474-heli balance flybarless controller 2-6s lipo for rc helicopter sale online store at wholesale price. ...

Only US$99.99, buy best matek h 743-wlite flight controller built-in osd 2-6s ardupilot inav open source for fpv drone rc airplane sale online store at wholesale price. ...

Matek LED Tail light WS2512B with Loud Buzzer Dual Modes for FPV Racer Multicopters It comes as H Type tail light with 8x WS2812B LEDs Loud Buzzer. It provides dual control modes, can be controlled by Flight Controller firmware (Cleanflight, Betaflight, etc.) or Transmiter. Specification: Brand name: Matek Item name: LED Tail light with Buzzer board Dual modes: FC control TX control TX mode: LED 7 colors (White, Red, Green, Blue, Yellow, Magenta, Cyan) LED 5 status (Constant light, Slow blink, Fast blink, Voilent blink) Buzzer: Lost Plane Finder FC mode: support Naze 32, SPRacing F3, etc. with Clean Flight or Betaflight firmware Input voltage range: 4.5~5.2V DCPower of TX mode (5V IN ): 1W/0.2A~2W/0.4A Sizemounting: Pls check the Layout Weight: 5g Package Included:1 X LED Tail light with Buzzer board ...

Matek Lost Model Beeper Flight Controller 5V Loud Buzzer Built-in MCU for FPV Multicopters It can be used on triditional PWM receivers or FPV racing flight controller. The tiny buzzer is driven by on board MCU. It can output louder sound than 5V active buzzers. Specification: Brand name: Matek Item name: 5V Loud Buzzer Built-in MCUWorking voltage range: 4.5-5.2V DCPower: 1W Max. Sound Output: 90d B Max. Size: 18x 13x 8mm Weight: 2g User Manual, please click here. Package Included:1 X Buzzer ...

Matek Mini Power Hub Power Distribution Board With BEC 5V & 12V For FPV Multicopter The Mini POWER HUB has been engineered to provide the highest possible performance & reliability in a 36*36mm 4 layers PCB. The HUB distributes power from a battery pack to 4 ESCs, as well as providing two synchronisedregulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S Li Po, & the BEC input is TVS protected. The HUB also features convenient solder bridge of various voltage for cameravideo transmitter. Description:- Band name: Matek- Item name: Matek Power Distribution Board- Dimensions: 36 x 36mm- Weight: About 6g- Mounting holes 30.5mm square spacing

Features:- 2oz copper 4-layers PCB.- ESCBattery solder tabs in pairs.- Solder Bridges of various voltage for Camera VTX.- DC/DC synchronous buck regulator, Efficiency is up to 95%.- TVS (Transient Voltage Suppressor) protection for DC/DC chip.- 5V12V Output LED indicators Short circuit tolerant. Specification: General:- Input voltage range (2S-6S operation): 7.2
- 26VDC- Regulated 5V & 12V outputs- LED power indicators (5V12V outputs )- 4 ESC outputs ESC outputs:- Continuous current: 20A per output- Peak current (10 seconds/minute): 30A per output BEC 5V output:- Designed for RC Receivers, Flight controllers, OSD, & Servos.- Voltage: 5.0 +/- 0.1VDC- Continuous current: 3 Amps- Short-circuit tolerant (10 seconds/minute)- LED (indicates voltage is in regulation, within 10%)BE


...